Call Us
Login
Basket
Swan Spares and Parts
Category
Top Selling Swan Spares
Belt 1860 9PHE
If your tumble dryer is not functioning properly, it could be due to its damaged drive...
£6.10
Rear Drum Bearing
If any component like drum bearings is not in order, then this may directly affect t...
£6.90
Thermostat Kit
Suitable for Ariston, Creda, Export, Hotpoint, Indesit, Proline Tumble Dryers. If your...
£12.05
Door Latch Catch
Genuine Tumble Dryer Door Latch for select models of Ariston, Creda, Indes...
£9.40
Belt Tension Jockey Wheel
Is your tumble dryer making strange noises? You might be able to fix the problem by ...
£11.55
Cut Out Thermostat Kit (B...
Fits Ariston, Creda, Export, Hotpoint, Indesit, Proline Tumble Dryers
£17.75
Door Catch With Lock
Fits Ariston, Creda, Crusader, Electra, Export, Hotpoint, Indesit, Jackson, Parnall, ...
£14.95
Vent Hose & Adaptor Door
1.6m (approx. 5ft) length tumble dryer vent hose that includes a 10.2cm (4 inch) ada...
£12.40
Drum Shaft Kit For Rivete...
This drum shaft kit is for drums with riveted drum shafts and contains the following i...
£14.70
Drum Shaft
Is your Tumble dryer making a clanging sound when spinning? It could be that the dru...
£9.40
On Off Start Switch Push ...
Fits Ariston, Creda, Crusader, Electra, Export, Hotpoint, Indesit, Jackson, Proline T...
£11.60
Latest Swan Spares Reviews
Good product delivered quickly
By Vincent Boult - Bexleyheath
Good product delivered quickly. Everything you need..
Easy to fit
By Leontia Ross - Belfast
Easy to find on the part search, delivered quickly and easy to install
good item and easy to install
By norman piper - bexhill on sea
Purchased the replacement handle for my Bosch tumble dryer. Delivered promptly and installed in minutes. Very competitive price.
Back in use!
By Tim Brook - DISS
Arrived quickly, fitted perfectly. Just tighten one screw and our tumble dryer is back in action!
drum bearing
By Robert Wright - Newcastle under Lyme
product arrived on time well made easy instructions to follow for fitting after I fitted the bearing and new belt and refitted all sides and top and ran the dryer, the drum did spin but was still slipping so removed the top slackened off all the side plate pins on both sides then ran the dryer the drum spun ok so will still spinning tightened all pins up and refitted the top worked perfectly
