Hotpoint
Hotpoint Tumble Dryer Heater Element 2.3KW & ThermostatsC00729823
Suitable for Hotpoint, Indesit, Swan
Stock Code: 825757
·
£32.50inc. VAT
£27.08 ex. VAT
In Stock
Next Day Delivery Available
Moderate DIY repair
A confident home repairer can do this with basic tools.
01
Compatibility Check
02
What this part does
Heats the drying air and uses the thermostats to hold it at a safe temperature.
03
Will this fix my appliance?
Tick the symptoms your appliance is showing. We’ll tell you how confident we are this part is the fix.
04
Error codes related to this part
Error codes are model dependent, so the same brand may have more than one listed.
| Code | Brand | What it means | Confidence |
|---|---|---|---|
| E2 | Hotpoint | Means a serious heating fault that causes the dryer to overheat or fail to heat. It is usually caused by a faulty thermistor, a broken heating element, or a control board issue. | High |
| F8 | Hotpoint | Means a heating circuit fault, where the heating element is energised when it should not be. It is usually caused by a faulty thermostat, thermal cut-out, or a malfunctioning control board. | High |
| F14 | Indesit | Means a heating circuit fault, specifically that the heating element is not activating. It is usually caused by a faulty heating element, a tripped thermostat, or faulty wiring or control board. | High |
| F4 | Indesit | Means a serious heating circuit fault that leaves the dryer producing no heat, usually within 3 to 5 minutes of operation. It is usually caused by a failed thermostat, a heating element, or a blocked airflow system causing overheating. | High |
| F8 | Indesit | Means a heater fault that pauses the cycle partway through. It is usually caused by a heater relay fault, a shorted or open heating element, or wiring damage. | High |
E2High
Hotpoint
Means a serious heating fault that causes the dryer to overheat or fail to heat. It is usually caused by a faulty thermistor, a broken heating element, or a control board issue.
F8High
Hotpoint
Means a heating circuit fault, where the heating element is energised when it should not be. It is usually caused by a faulty thermostat, thermal cut-out, or a malfunctioning control board.
F14High
Indesit
Means a heating circuit fault, specifically that the heating element is not activating. It is usually caused by a faulty heating element, a tripped thermostat, or faulty wiring or control board.
F4High
Indesit
Means a serious heating circuit fault that leaves the dryer producing no heat, usually within 3 to 5 minutes of operation. It is usually caused by a failed thermostat, a heating element, or a blocked airflow system causing overheating.
F8High
Indesit
Means a heater fault that pauses the cycle partway through. It is usually caused by a heater relay fault, a shorted or open heating element, or wiring damage.
Don’t see your code? Different model years sometimes use different codes. Get in touch with our parts team and we’ll help you identify the right replacement.
05
Fitting Guidance
MediumGeneral fitting guidance. The exact steps can vary slightly with the make and model of your tumble dryer.
Safety: Switch off and unplug at the mains and let it cool before you start.
You’ll needScrewdriverNut driver
- 1
- 2
- 3
- 4
- 5
- 6
06
Specifications
- Part Number
- C00729823
- Alternative Part Numbers
- C00378864
- EAN / Barcode
- 8053190127141
- Genuine Spare Part
- Yes
07
More Details
How do the heating element and thermostats disperse heat in your tumble dryer?
When a tumble dryer's heating element transforms electrical energy into heat energy, it radiates heat. The dryer drum is heated throughout by a coil or wire that heats up as an electric current flows through it.
Dryer thermostats adjust temperature by tracking heating element heat to maintain safe and effective ranges.
Why do you need to change it?
A malfunctioning heating element can result in inadequate heat production or no heat at all, and have inefficient drying and longer drying times. Similarly, the thermostats need replacement if they fail to regulate the temperature accurately.
When the dryer overheats or underheats, it can damage clothes or cause poor drying performance.
Would this fit in my tumble dryer?
This heater element and thermostats is a genuine Hotpoint tumble dryer spare part. It also fits Indesit and Swan tumble dryers. Use our compatibility checker to see if this part fits your model.
Fits models:
- Hotpoint - FETC70BPUK
- Hotpoint - CDN7000BPUK
- Swan - STC407BBUK
08
Customer Reviews (6)
5.06 reviews
5
6
4
0
3
0
2
0
1
0
Sort by:||
Heater
Great product Easy to fit and works perfectly Will buy again if required
David Lee · Fulwood ·
Quality
Value
Ease of Fitting
Thermostat / Heater
Excellent Product Easy to fit and works perfectly Will order again if required
David Lee · Preston ·
Quality
Value
Ease of Fitting
Perfect fit.
Visually identical to the broken part in my tumble dryer. Fitted straight in. Works perfectly. 10/10
William Robins · Brentry ·
Quality
Value
Ease of Fitting
Easy to find
Found the part easily by using the model number. Great value and was delivered on time
Melissa Dyer · Cheshunt ·
Quality
Value
Ease of Fitting
Exactly what I needed
Easy to check compatibility, quick delivery and the part is just what I needed to fix my dryer!
Kerrie · Manchester ·
Quality
Value
Ease of Fitting
09
Questions & Answers (1)
Hi there does this come as seen on picture. With the element and thermostat all ready secure to metal plate
Chris · Glasgow ·
Hi Chris, I can confirm this is supplied as per the image.
JordanStaff·