How to Replace a Fridge Freezer Drawer Front Basket Handle - Indesit

Make and Model of Fridge Freezer Used in This Video

Indesit IBD5515S1 (769991603461)
Indesit IBD5515S1 (869991603460)

Part Used in This Video

Fridge and Freezer Drawer Front Basket Handle

Key Moments in the Video

0:20 - Removing hinge
0:32 - Removing existing freezer drawer front
0:36 - Installing new freezer drawer front
0:46 - Re-attaching hinge

Video Transcript

All you’ll need for this is a Phillips screwdriver.

Firstly, pull the freezer drawer front down and remove the two screws on the right side hinge - pop these to one side for later on.

Then, gently manoeuvre the hinge from the two holes in the side of the freezer section and pull away. It might be a little bit tight to begin with, so remove it slowly.

Using the small circular hole on the new freezer drawer front, connect the left side of the freezer drawer front to the existing hinge on the left side as shown.

Now repeat the process for the hinge on the right side

Then, connect the freezer drawer front to the hinge for the right side. Then, using the two back connectors on the hinge, gently insert these into the side of the freezer and the lower connector into the freezer tray.