0333 300 1293

Phone Lines Open Mon - Fri 10 am - 4.30 pm (excluding bank holidays)

HOTPOINT FRIDGE & FREEZER FREEZER DRAWER FROZEN FOOD

5.0 out of 5 customer rating

Read review(s) | Read customer question(s)

Our Part Number: RS143914

In Stock Next Day Delivery Available

Category: Fridges & Freezers

Our Price

£21.10

Please correct the errors and try again.
 
Genuine Spare Part
Genuine Spare Part
Genuine Spare Part
Next Day Delivery Available
More About Delivery

Is this part compatible with my appliance?

Choose your brand from the list below to check your model compatibility.

Details / Specifications

Fits Hotpoint, Indesit Fridges & Freezers

Latest Product Review(s)

5 Customer Review(s)

Fit like a charm!

By Aduragbemi - Banke-Thomas - 26th Jan 2019

The switch was really straightforward. It fit like a charm. I had been searching for spare parts for the broken front plates of my fridge freezer. I got to Ransom spare parts and there it was. Little confusing as per what to do if the fridge-freezer's middle section front plate was broken, but a quick call to them sort the confusion out. This is an excellent spare part!! I am delighted! Now I can open the freezer and smile. :)

Overall

Quality

Value

Ease of Fitting

Freezer Drawer Fronts

By Geoff - Knapp - 19th Jun 2017

The plastic drawer fronts on most freezers are not very sturdy and three of mine had cracked, two of them badly. Finding the item and ordering on Ransom Spares website was easy. £13+ seems a bit pricey to me but that is the price on various sites, some a lot higher. I ordered two drawer fonts and they were received within a week. The fitting is a bit scary as it is necessary to prize the old drawer front off, fearing that it will break the drawer itself. However both fronts were replaced successfully and look good. I will now order the third drawer front I need to complete the repair.

Overall

Quality

Value

Ease of Fitting

Questions And Answers

1 Answer(s)
Will this drawer fit a Hotpoint ice diamond RFA52 it is an old model but in good condition I need the full middle drawer including front
By Pamela - East Riding of Yorkshire - 31/07/2018
A
Hi Pamela, this is not the correct part for your fridge freezer. The parts you need to order are /parts/fridges-freezers/hotpoint/drawer-front-flap-/35012.htm and /parts/fridges-freezers/hotpoint/middle-or-top--freezer-drawer-body/30379.htm.
By Sam - 31/07/2018
1 Answer(s)
What are the measurements
By A - Midlands - 01/08/2018
A
Hi A Jenkins, the sizes of these parts are: Width - 405mm, Depth - 220mm, Height - 190mm. 
By Sam - 01/08/2018
1 Answer(s)
Is this the full drawer? The front also.
By Kat - Sunderland - 20/08/2018
A
Hi Kat, this is supplied as a complete drawer with the front.
By Sam - 20/08/2018
1 Answer(s)
Hi - I need drawers for an Indesit integrated freezer, model INC325AIUK. It says online that your drawers are compatible with that model. But the measurements you gave are different to the old drawers that I have. What are the actual measurements (INCLUDING the front) of your drawers? And what is your Returns Policy? Please advise. Many thanks
By Ren - London - 17/10/2018
A
Hi Ren, Please fill out a part enquiry form advising which drawer and front flap it is you are after. Please see our returns section in regards to our returns policy. 
By Rosie - Staff Member
1 Answer(s)
Hi i am looking for bottom drawer for a hotpoint ice diamond model Rfa52 s Do you supply the front with the drawe ?
By Robert - Glasgow - 18/05/2019
A
Hi Robert, this particular part will be the complete lower/ bottom drawer for your model of fridge freezer which includes the front panel.
By Lauren - Staff Member
1 Answer(s)
What are the dimensions of this drawer?.The one I am replacing is 350mmdeep x 410mmwide x 160mmhigh(front)x140mm(side).
By Robert - Tyneside - 12/07/2019
A
Hi Robert, the dimensions for this drawer are: 410mm wide, 220mm deep and 195mm high. If you would like assistance finding the correct drawer, please forward all of your model details to our parts form and we will locate the correct part/s which you require.
By Lauren - Staff Member
1 Answer(s)
I have a MFI integrated freezer. I dont know what make it is Will these drawers fit ?
By Heather - Aberdeen - 21/10/2019
A
Hi Heather, unfortunately we wouldn't know if this would fit your freezer without the model number. This is usually behind the bottom freezer drawer on a sticker. If you can find this, please fill out a part enquiry and we can look in to finding the drawers you require.
By Jordan - Staff Member
1 Answer(s)
Hi I am looking for the middle drawer for a Hotpoint Freezer Model RVA30. The Freezer itself is great but the middle drawer has cracked. Will this fit?
By Monica - Bradford - 23/11/2019
A
Hi Monica, I'm afraid we don't have any spares listed for this model number. Please enter a submit a part enquiry and include all the model details from the appliance and we can look in to finding the correct part.
By Jordan - Staff Member
1 Answer(s)
Will this replace the lower drawer on a hotpoint iced diamond RZAV21?
By Glenn - Clacton on Sea - 04/12/2019
A
Hi Glenn, the lower drawer for your model is RS30260.
By Jordan - Staff Member
1 Answer(s)
I have a hotpoint first edition fridge freezer and need a new bottom drawer for the freezer as the handle has snapped. Do you supply this please, unfortunately I don't have the model number
By Ceri - Cardiff - 18/03/2020
A
Hi Ceri, I'm afraid without the model number we won't be able to confirm the correct part. The model details can usually be found behind the salad drawer in the fridge section. If you are able to find this, please fill out a part enquiry and we can look in to this for you.
By Jordan - Staff Member

Be the first to ask a question for this product.

Page: 1 2 »

Ask a new question