Next Day Delivery Available
AEG Fridge & Freezer Magnetic Door Seal
Suitable For Models Of: Acec, AEG, Alno, Arthur Martin, Blomberg, Brandt, De Dietrich, Electrolux, Elektra, Elektra Bregenz, Elektro Helios, Elin, Fa... View All
Will This Part Fit My Appliance?
Choose your brand from the list below to check your model compatibility.
Start typing your model number below to check compatibility.
Suitable For Models Of
Acec, AEG, Alno, Arthur Martin, Blomberg, Brandt, De Dietrich, Electrolux, Elektra, Elektra Bregenz, Elektro Helios, Elin, Faure, Firenzi, Frigidaire, Husqvarna, Husqvarna Electrolux, Ikea, John Lewis, Juno, Kuppersbusch, Leonard, Lloyds, Matura, Nardi, Neue, Privileg, Progress, Rex, Seppelfricke, Smeg, Tricity Bendix, Zanker, Zanussi, Zoppas Fridges & FreezersDescription
Genuine magnetic white rubber door seal to maintain your fridge’s internal temperature. Measures 821mm, while its width spans 516mm.
The door seal keeps cold air from escaping and warm air from entering so your food stays fresh longer. No moisture enters so there’s no condensation buildup and food damage.
It lessens the strain on the fridge’s cooling system so it’s energy efficient.
A high-quality door seal gasket reduces your fridge’s noise.
This magnetic white door seal is from AEG. You can also check in with the other suitable brands from the list above.
Before ordering, please verify that this part is suitable for your model using our compatibility checker.
Manufacturers Part Number:
- 2248007052
Alternative Part Numbers:
- 2248003077
- 2248007052
- 2348755402
- 2426365264
- 50117332002
EAN Number:
- 7321420583472
Will this part fit your appliance?
Use our compatibility checker, Click here.
Finding your model number:
Struggling to find the model number on your Fridge & Freezer? Click here.
Safety note:
Warning: Always unplug any appliance from the electricity supply before carrying out any work or testing on it.
Latest Product Review(s)
Easy to fit
Easy to fit but read the instructions that comes with the door seal :) . Did not expected that the original freezer door seal to be attached to the door and needed to be cut with a sharp blade, realised only after the door was starting to come apart in half. Only then I saw that the paper with instructions, which I tought is the invoice, and it was a five minutes job as expected. Fitted like a glove, can't fault it. Thank you RansomSpare
Works just fine
I had thought the original seal would just pull off and this new seal would be pressed in place but not so. The original seal needs to be cut off with a sharp knife which can be a bit daunting as once you have started cutting there is no turning back. Need to be a bit careful trimming the old seal so you don't cut into the hard plastic but quite easy once you start. Fitting the new seal was quite easy, I pushed both the corners in first then worked my way along the top followed by the sides then the bottom. For some reason the bottom section was very hard to push in but a drop of washing up liquid rubbed along the seal seemed to do the job. The new seal has been fitted for about 2 weeks now without any problems.
Fridge Door Seal
Needed a bit of work to get it to fit, not straightforward. When fitted t did the job,
Perfect fit
The original seal was mouldy and discoloured. I'm glad we've found Ransom Spares and I could replace it easily. I'm very happy with the product.