Will This Part Fit My Appliance?

Choose your brand from the list below to check your model compatibility.

Start typing your model number below to check compatibility.

Description

Drawer Front 240mm x 430mm. If you need to replace a faulty drawer front for select Ariston and Hotpoint refrigerators this part could be what you're looking for.

Fitting The Drawer Front

The following fitting advice was left via one of our customers reviews and we thought it was worthy of highlighting ... Thank you Norman, from Lymm.

Norman wrote:

Others have commented on the difficulty of removing the old / broken door front. I agree with them, but would add by allowing the drawer to come to room temperature ( washing it helps) then the plastic becomes a little more flexible. Also, as others have stated turn the drawer upside down and then by using a flat bladed tool ( wallpaper scraper is ideal) apply gentle leverage on the bottom edge of the drawer first, to encourage the holes to pop over the plastic pegs. Work across the bottom then each side in turn leaving the two protruding different shaped pegs until last. To fit the new door put the two different shaped pegs in place first, then apply gentle pressure to pop the new door into place. It is far easier to fit the new door front than it is to get the old one off.

Latest Product Review(s)

Read All Reviews
25 Customer Review(s)

Freezer Tray front

Not cheap but easy to fit - secret is to let old drawer warm up before prising old front off

By Cackhanded - Guildford
28th Dec 2023

Overall

Quality

Value

Ease of Fitting

Freezer Drawer Fronts

Ordered the product and within 2 days received the product. Kept me informed via email as to when the product will be delivered. Will definitely be ordering again.

By Sam - Blackburn
3rd Feb 2023

Overall

Quality

Value

Ease of Fitting

Superb product,great fit

Really can't recommend these guys enough, quick easy ordering ,quick delivery and correct part everytime. Superb service.

By Chris nancekivell - TAVISTOCK
21st Feb 2022

Overall

Quality

Value

Ease of Fitting

Looks Good, Easy To Fit

Easy ordering and a prompt delivery service, quick and easy to fit, looks just like the original.

By Maurice Sampson - Bournemouth
29th Sep 2021

Overall

Quality

Value

Ease of Fitting

Perfect

This and other drawer fronts were perfect. Just take your time when fitting.

By Dawn - Northampton
11th May 2021

Overall

Quality

Value

Ease of Fitting

works a treat

the drawer front was easy to fit, bit more difficult getting old one off

By Terence Wicks - dagenham
29th Jan 2021

Overall

Quality

Value

Ease of Fitting

Great product

Great quality, fitted really easily, arrived promptly too

By R Griffiths - Carmarthenshire
21st Jan 2021

Overall

Quality

Value

Ease of Fitting

Fantastic

Bought new drawer front for my freezer-much cheaper than other sites, great service There’s a good review on this site with great tips about fitting it!

By Elaine Snaith - Newcastle
31st Dec 2020

Overall

Quality

Value

Ease of Fitting

front panel

great service , part fits perfectly ,will order from this company again

By yvonne higgins - high wycombe
3rd Dec 2020

Overall

Quality

Value

Ease of Fitting

Draw Front

Good quality part as expected as it’s genuine hotpoint. Fitting was a little difficult as you have multiple points to lift at same time to remove the old front but if you take your time it’s should come off without breaking the draw itself.

By Matthew Hester - Abergavenny
20th Apr 2020

Overall

Quality

Value

Ease of Fitting

Load More Reviews

Questions And Answers

1 Answer(s)
Will this fit the middle drawer of RF187MP?
By Chi - London - 05/06/2020
Hi Chi, I can confirm this is the middle drawer front for your model.
By Jordan - Staff Member
1 Answer(s)
Will this fit a Hotpoint Ocean FZFM151 Freezer drawer front ? I need 2 off which are the 2 largest drawers ( 2nd & 4th drawers from the bottom). Both measure 240 x 430
By Nigel - Borehamwood - 17/08/2021
Hi Nigel, I can confirm this is correct for both drawer fronts you require.
By Jordan - Staff Member
1 Answer(s)
Hi- will this fit a hotpoint FUFL 1810 model super freezer draw?
By Rebecca - Gillingham - 06/08/2022
Hi Rebecca, please submit a part enquiry with the full model details from the rating plate behind the salad drawer so we can check this for you.
By Jordan - Staff Member
1 Answer(s)
Hi Will this fit the largest drawer of my FZFM171G? Believe it will but can you confirm please. Presumably it’s clear? Many thanks
By Amanda - Dunmow - 29/01/2023
Hi Amanda, I can confirm this is the largest drawer front for your model and it is clear.
By Jordan - Staff Member

Be the first to ask a question for this product.

Ask a new question

Customers Also Viewed