1. Access belt
Remove the screws from the rear panel to access the belt.
Place the rear panel to one side.
2. Remove belt
To remove the belt, rotate the pulley and gently pull the belt away from the motor pulley.
3. Install new belt
To attach the new belt, place it over the motor pulley at the bottom.
Then place it over the drum pulley.
Rotate the drum pulley and feed the belt on.
4. Re-assemble washing machine
Re-attach the rear panel.
Re-screw the screws back in place.
And that's it, your new washing machine belt is all set to go!
