1. Access and remove old door seal
Firstly, open the washing machine door and pull back the seal to expose the spring of the band clamp.
Using a small flat head screwdriver, lever out the spring and pull to remove the band clamp from the machine.
Peel the door seal away from the machine.
Next, remove the lid.
Using your Phillips screwdriver, unscrew the 2 screws at the rear of the machine.
Remove the lid and place to one side.
Gently tilt the drum backward. Using your flathead screwdriver, pry the spring out and away from the machine.
You can now lift the door seal away from the outer tub.
2. Install new door seal
When fitting the new door seal, ensure the drain holes on the are located at the bottom to drain water away.
Place the new door seal roughly in position, through the door porthole.
Line up the door seal with the drain holes at the bottom, feeding the door seal onto the lip of the machine gradually working your way round.
Roll the door seal inside itself.
Next, fit the band clamp over the door seal gradually working your way round.
Un-flip the door seal.
Next, feed the door seal around the lip of the machine, working your way round until it is all secured.
Next, re-fit the band clamp feeding it all the way round the seal.
Re-fit the lid and re-screw the screws back in place.
And that’s it, your new Indesit washing machine door seal is all set to go!
