Next Day Delivery Available
Will This Part Fit My Appliance?
Choose your brand from the list below to check your model compatibility.
Start typing your model number below to check compatibility.
Part is compatible with 
We are unable to confirm if this part will fit with model number ""Description
Manufacturers Part Number:
- 5.093-025.0
Alternative Part Numbers:
- 50930250
Latest Product Review(s)
Read All Reviews
7 Customer Review(s)
Easy to fit, came as described
Item came quick, easy to fit only 4 bolts. Doesn’t come with bolts or seals but should be able to use the ones of the original machine unless damaged.
By H Grimes - Liverpool
8th Apr 2024
Multiple Failures?
I made an earlier review after replacing one of these..... Within a day or 2 it cracked again, bending all 4 screws! A Lot of pressure was involved and can't have been from freezing! I was going to replace the one way valves when I discovered that Karcher feed what they call "recoil" back to this housing and rely on the flexible hose pipe to absorb the shockwave when the lance trigger is released. The supply hosepipe was fitted with a flowstop type coupling, it's internal valve prevented the back flow, presumably, this shockwave was not dispersed in the hosepipe and caused explosive failure of the housing. Check that the hosepipe is sufficiently long and that a free flowing adapter is fitted.
By Robert - Deeside
23rd Apr 2021
Good part
Does exactly what it says, easy to fit but I prefer to tap out threads in the mounting holes, M5 if memory serves this will almost guarantee that the bolt holes don’t split if you misalign the the self taping screws/bolts.
By Alasdair Marshall - Braintree
3rd Apr 2021
Perfect match, fitting requires some care
Water was leaking from the inlet side of a K7 pressure washer, connecting hose with the main cover off revealed water leaking from that the inlet housing, which acts as a motor cooling jacket, it had cracked around where the plastic water inlet connector inserts, presumably water had frozen and caused the damage. With the model number, Ransom Spares site allowed me to identify the correct part, and associated O rings which seal this against the motor. The replacement component is the same as the original, with thin cast alloy which is a tight fit against the seals. a long shafted torx driver was required to fit into the screw heads without the handle fouling against the motor. Care and patience was required to snug down the screws in a number of stages to avoid jamming the cover or damaging the screw threads. Lots of disassembly is necessary. Order seals for the high pressure hose spindle, 2 large O rings (different items), water inlet seals and a press-on wheel retaining washer.
By Robert - Deeside
30th Mar 2021
Great replacement part
Delivery was reasonably quick and the fitting was not to challenging So all in all I’m pleased
By Christopher Flay - Bristol
16th Jun 2020
Questions And Answers
1 Answer(s)
The karcher premium plus outer covering water flow popped and water flowing out, went opening up the machine there was a right through it ordered the part with ransomspares. co.uk ( No problem there) fitted it worker fine till the next time I went to use it the same pop and a in it all be it a lot smaller but can’t use it, can anybody help with this problem I’d be very grateful regards Chris Flay
Hi Christopher, please submit a part enquiry, including the TYP number from the bottom of the pressure washer, so we can look in to this for you.
1 Answer(s)
The holes don’t have any threads, do I cut threads myself with a tap? Or should it have come with the threads already there? Thanks
Hi Jacob, this is a soft metal, so they threads will cut as you screw them in.
Customers Also Viewed
O-Ring Seal 146X5 Epdm
O-ring seals create a watertight link between pressure washer parts
Press...
£4.60
O-Ring Seal D130x5
O-ring seals create a watertight link between pressure washer parts
Press...
£4.15
High Pressure Outlet With...
What does the outlet with clamps do in pressure washers?
The outlet with clamps...
£12.45
