Bosch Pressure Washer Handgun Spray Handle Switch GunF016F03978

Replacement as the original had started to leak at the trigger mechanism. Hairline fracture in the plastic tube despite being thoroughly dried and protected from frost, so maybe a weak point here. New one working fine. Fitting is easy, but with time the plastic to plastic joint gets a bit seized, so make sure to push the nozzle back home into the Handle Gun (about 3 m/m) before you can turn (90%) and remove it. The end face on the nozzle which is flush with the Handle when loaded will now disappear inside. Before fitting, smear a little Vaseline or similar on the joint. Slacken the end screws allowing two half's to separate a little can help. Good looking product, but I think a little pricey, with no internal replacement parts available so as to repair.

Despite the lockdown situation my order arrived very quickly. it was very simple to fit and the site was very helpful when requesting further information. I would certainly recommend and will use again in the near fiuture. excellent

Had extreme difficulty attaching the push and twist lanse. Even applied a thin layer of grease to no avail. Ended up stripping the Tigger apart inserted the lanse and reconnected both halves. Otherwise it works good.

very good purchase I am completely satisfied fast Delivery Secure regulation