0333 300 1293

Phone Lines Open Mon - Fri 10 am - 4.30 pm (excluding bank holidays)

How To Replace The Cable And Cable Reel Moulding And Contacts On A Henry Hoover

Video transcript:

Hi I’m lee and in today’s video I’m going to show you how to replace the Cable, and the Cable Reel Moulding & Contacts on a Henry Vacuum Cleaner.

The first step is to remove the head from your Henry Vacuum Cleaner.  Next we need to remove the 4 screws and separate the cable reel moulding from the motor housing.  Now the 3 screws should be removed and then separate the cable reel moulding and contacts from the cable winder.  We can now replace the cable, moulding and contacts or just the contacts on your Henry vacuum cleaner.  Once the faulty part has been replaced we can reconnect the cable and wind back on to the moulding, Re fit the cable winder to the cable reel moulding and contacts, Re fit the cable reel moulding to the motor housing and then replace Henry's head.

It's as simple as that.  Remember all spares for Henry vacuum cleaners can be found on our website at Ransom Spares.co.uk

By Lee Gilbert