Will This Part Fit My Appliance?

Choose your brand from the list below to check your model compatibility.

Start typing your model number below to check compatibility.

Suitable For Models Of

Baumatic, Bayer, Berloni, Brother, Candy, Concord, Crop, Crystal, Cylinda, Edesa, Eltag, Essalem, Fagor, Fortress, Friac, Gala, Gasfire, General Electric, Haier, Hitachi, Hoover, Hoover-Helkama, Iberna, Ignis, Jinling, Kelvinator, Lamona, Leran, Mastercook, Maytag, New Harmony, Orion, Ostein, Otsein, Otsein-Hoover, Pacific, Philco, Primotech, Rosieres, Soliera, Teka, Vendome, Vyatka, Westinghouse, Whirlpool Asia, Zerowatt, Zerowatt-Hoover Washing Machines

Description

What do carbon brushes do in a washing machine?

Carbon brushes establish contact with the spinning armature through attachment to the motor.

The carbon brushes facilitate the necessary electrical connection to enable power transmission to the drum or pump. They also regulate the electrical current and control the motor's speed and operation.

Why do you replace them?

Carbon brushes need to be replaced when they wear down or become too short. The constant friction and contact with the spinning armature gradually wear out the carbon brushes over time.

This wear down gives you reduced motor performance, intermittent operation, or even motor failure.

How do you install new carbon brushes on your washing machine? 

See our demo video below on how to replace the carbon brushes on your washing machine.

These carbon brushes fits Candy, Baumatic, Bayer, Berloni, Brother, Concord, Crop, Crystal, Cylinda, Edesa, Eltag, Essalem, Fagor, Fortress, Friac, Gala, Gasfire, General Electric, Haier, Hitachi, Hoover, Hoover-Helkama, Iberna, Ignis, Jinling, Kelvinator, Lamona, Leran, Mastercook, Maytag, New Harmony, Orion, Ostein, Otsein, Otsein-Hoover, Pacific, Philco, Primotech, Rosieres, Soliera, Teka, Vendome, Vyatka, Westinghouse, Whirlpool Asia, Zerowatt, and Zerowatt-Hoover washing machines.

How to replace Washing Machine Carbon Brushes:

The following DIY repair video should assist you in fitting this part.  However the exact procedure may differ depending on your make and model.

WarningSafety Warning - Always unplug from the mains before carrying out any repairs.

Latest Product Review(s)

Read All Reviews
21 Customer Review(s)

Quick and Easy repair

Once the motor was removed changing the brushes was was just a matter of removing the connecting cable and undoing two screws. Reverse and job done - 5 minutes max. Washing machine now happy and doesn't keep stopping. Original part so expect it to last many years.

By Chris - Bridgend, Wales
5th Jan 2024

Overall

Quality

Value

Ease of Fitting

So Simple

Easily identified the part i needed, easily ordered and delivered relatively promptly (although postage cost isn't the cheapest). Simple to fit and Washing Machine now works fine. Well done Ransom

By Martin Edwards - LINCOLN
5th Oct 2023

Overall

Quality

Value

Ease of Fitting

Genuine part, Great price

If you are looking for brushes for a Candy GV168T3S washing machine then these are the ones that fit with no modification, I’d defiantly buy from Ransom Spares again.

By Mike Griffiths - Wrexham
23rd Mar 2022

Overall

Quality

Value

Ease of Fitting

Hoover product, Ransom Prices

Came inside a Hoover packaged bag, YouTube video was so helpful. Fitting was easy and at a third of the same item on the hoover website. Ransom rocks 🪨

By Bill - Wolverhampton
18th Mar 2022

Overall

Quality

Value

Ease of Fitting

New Carbon brushes

It took a bit of research to find the right model of carbon brushes but I managed to do so without the help of Ransomspare support. Part received and changed ; I am expecting the washing machine to go on for another fair few years. Ransomspare always seems to come as the cheaper site for parts these days, I have used them many times and never been disappointed.

By Pierre - Leeds
18th Jan 2022

Overall

Quality

Value

Ease of Fitting

Perfect fit

Had no idea what part number I needed. Ransom were really helpful in getting the part identified and then shipped out in a couple of days. Easy to fit - great service and product.

By David Hemnell - Liverpool
29th Nov 2021

Overall

Quality

Value

Ease of Fitting

Works for DXC E49W3/1-80

Worked on Hoover DXC E49W3/1-80. Part was easy to fit and of good quality. Brush is designed to be pushed in so no chance of damage in transit.

By Arran Osborne - Tonbridge
18th Oct 2021

Overall

Quality

Value

Ease of Fitting

fast delivery

Part ordered on the sunday delivered on wednesday very happy

By marguerite hart - solihull
14th Feb 2021

Overall

Quality

Value

Ease of Fitting

Motor brushes

Diagnosed fault on internet, removed motor & found brushes worn out as expected. Email to customer services confirmed correct part as not listed for my WM (thanks Tony). Order arrived quickly, part easy to fit & WM was running again for a fraction of the cost of a new motor or having to call out a repairman.

By Richard - Redditch
3rd Nov 2020

Overall

Quality

Value

Ease of Fitting

Hoover carbon replacement brushes

Good quality product Fast and efficient delivery had support with emails customer service excellent Would use again any highly recommend Mr price Derbyshire

By Marshall Price - Derbyshire
2nd Jun 2020

Overall

Quality

Value

Ease of Fitting

Load More Reviews

Questions And Answers

1 Answer(s)
Hi I have a candy gv158T3w washing machine and need bushes go the motor , can you advise if these fit , or were to get them , thank you
By Shaun - Liverpool , - 03/12/2019
Hi Shaun, to be able to identify the brushes for Candy washing machines we'd need to know the details from the motor itself. Please submit a part enquiry including all the names and numbers from your motor and we should be able to find the correct carbon brushes.
By Jordan - Staff Member
1 Answer(s)
hi I need carbon brushes for a washing machine Hoover WDXA 4851-80 . Can you please advise if RS123038 is compatible. Thanks
By david - London - 19/09/2020
Hi David, to be sure we'd need the model details from the motor itself. Please submit a part enquiry with these and we can check this for you.
By Jordan - Staff Member
1 Answer(s)
Hi, This part is listed as compatible with AHD 127V 31005351 providing it has a CETEC motor. My washing machine motor says it is a Haier, can you please tell me if these brushes are correct for an AHD 127V 31005351 with a Haier motor. Alternatively, can you please let me know which ones are correct?
By Anita - Cornwall - 23/10/2020
Hi Anita, I can confirm this is correct for the Haier motor.
By Jordan - Staff Member
1 Answer(s)
Will these brushes fit my Hoover HNL 662 - 80 (3100259608236306) please
By Minoo - Newport - 06/07/2021
Hi Minoo, please submit a part enquiry including the full model details from the rating plate on the motor itself, so we can confirm the correct carbon brushes.
By Jordan - Staff Member
1 Answer(s)
Hi, Will these fit a Hoover Link Washing Machine Model HL1692D3-80 ?
By Michael - WAKEFIELD - 15/11/2021
Hi Michael, please submit a part enquiry, including the full details from the rating plate on the motor itself so we can confirm the correct brushes.
By Jordan - Staff Member

Be the first to ask a question for this product.

Ask a new question

Customers Also Viewed