Zanussi
Zanussi Washing Machine Pump Valve Seal8076690026
Suitable for Zanussi, AEG, Electrolux, Elektro Helios, Faure
Stock Code: 673067
£23.40inc. VAT
£19.50 ex. VAT
Usually dispatched in 5 working days
Moderate DIY repair
A confident home repairer can do this with basic tools.
01
Compatibility Check
02
What this part does
Seals the pump to tub joint and stops drained water flowing back in.
03
Will this fix my appliance?
Tick the symptoms your appliance is showing. We’ll tell you how confident we are this part is the fix.
04
Error codes related to this part
Error codes are model dependent, so the same brand may have more than one listed.
| Code | Brand | What it means | Confidence |
|---|---|---|---|
| E30 | AEG | Means water has been detected in the bottom tray and the anti flood system has tripped, or a fault with the water pressure sensor. It is usually caused by leaks, over sudsing, or laundry trapped in the door seal. | Medium |
| EF0 | AEG | Means a water system fault, with water accumulating in the bottom tray. It is usually caused by too much detergent, a dirty dispenser, or a leak. | Medium |
| EF3 | AEG | Means a water sensor fault relating to water ingress and a failure to reset after flooding. It is usually caused by a leaking door seal that is damaged or cracked. | Medium |
| C3 | Electrolux | Means a flood or water has been detected in the bottom tray, often with 3 beeps. It is usually caused by a leaking seal, a clogged drain filter, excessive suds, or laundry trapped in the door seal. | Medium |
| E13 | Electrolux | Means there is a water leak into the base pan, or the water level drops below the required point during operation. It is usually caused by a slow leak, over-sudsing, or a faulty pressure sensor or switch. | Medium |
| EF0 | Electrolux | Means a flood safety condition has been triggered. It is usually caused by excessive suds, a clogged drain filter, an internal water leak, or a leaking door seal. | Medium |
| E13 | Zanussi | Means an internal water leak has triggered the anti-flood device in the base of the machine. It is usually caused by a drain pump fault, a split hose, or a loose seal. | Medium |
| EF0 | Zanussi | Means the anti-flood system has been activated with water detected in the base tray, also reported as EFo or EF3. It is usually caused by excessive foam from over-soaping, a clogged drain filter, or a minor leak. | Medium |
| EF3 | Zanussi | Means the Aqua Control system has detected a water leak and activated safety mode. It is usually caused by over-sudsing, a damaged door seal, a filter blockage, or a leak into the base tray. | Medium |
E30Medium
AEG
Means water has been detected in the bottom tray and the anti flood system has tripped, or a fault with the water pressure sensor. It is usually caused by leaks, over sudsing, or laundry trapped in the door seal.
EF0Medium
AEG
Means a water system fault, with water accumulating in the bottom tray. It is usually caused by too much detergent, a dirty dispenser, or a leak.
EF3Medium
AEG
Means a water sensor fault relating to water ingress and a failure to reset after flooding. It is usually caused by a leaking door seal that is damaged or cracked.
C3Medium
Electrolux
Means a flood or water has been detected in the bottom tray, often with 3 beeps. It is usually caused by a leaking seal, a clogged drain filter, excessive suds, or laundry trapped in the door seal.
E13Medium
Electrolux
Means there is a water leak into the base pan, or the water level drops below the required point during operation. It is usually caused by a slow leak, over-sudsing, or a faulty pressure sensor or switch.
EF0Medium
Electrolux
Means a flood safety condition has been triggered. It is usually caused by excessive suds, a clogged drain filter, an internal water leak, or a leaking door seal.
E13Medium
Zanussi
Means an internal water leak has triggered the anti-flood device in the base of the machine. It is usually caused by a drain pump fault, a split hose, or a loose seal.
EF0Medium
Zanussi
Means the anti-flood system has been activated with water detected in the base tray, also reported as EFo or EF3. It is usually caused by excessive foam from over-soaping, a clogged drain filter, or a minor leak.
EF3Medium
Zanussi
Means the Aqua Control system has detected a water leak and activated safety mode. It is usually caused by over-sudsing, a damaged door seal, a filter blockage, or a leak into the base tray.
Don’t see your code? Different model years sometimes use different codes. Get in touch with our parts team and we’ll help you identify the right replacement.
05
Fitting Guidance
MediumGeneral fitting guidance. The exact steps can vary slightly with the make and model of your washing machine.
Safety: Switch off at the mains and turn off the water supply before you start.
You’ll needTowelsBowlPliers
- 1
- 2
- 3
- 4
- 5
- 6
- 7
06
Specifications
- Part Number
- 8076690026
- Alternative Part Numbers
- 8076690018
- EAN / Barcode
- 7321423142690
- Genuine Spare Part
- Yes
07
Customer Reviews (1)
5.01 review
5
1
4
0
3
0
2
0
1
0
Leak from underneath
Second one I’ve fitted, genuine part, seems to be a something that leaks after a few years. Will only fit back in one way.
Robert barron · Dormansland ·
Quality
Value
Ease of Fitting