Zanussi
Zanussi Washing Machine Drive Belt (5PJ1281)660513
Suitable for Zanussi, Elektro Helios, Faure
Stock Code: 999076
£8.57inc. VAT
£7.14 ex. VAT
In Stock
Next Day Delivery Available
Moderate DIY repair
A confident home repairer can do this with basic tools.
01
Compatibility Check
02
What this part does
Transfers motor power to turn the drum.
03
Will this fix my appliance?
Tick the symptoms your appliance is showing. We’ll tell you how confident we are this part is the fix.
04
Error codes related to this part
Error codes are model dependent, so the same brand may have more than one listed.
| Code | Brand | What it means | Confidence |
|---|---|---|---|
| E50 | Zanussi | Means a motor failure or motor-related fault, with the motor unable to drive the drum. It is usually caused by faulty motor carbon brushes, a broken belt, a failed motor, or a motor speed sensor tachometer fault. | High |
| E53 | Zanussi | Means a motor control circuit failure, specifically a fault with the motor triac sense circuit on the electronic PCB. It is usually caused by a damaged soldered link on the circuit board, a faulty motor, or wiring issues between them. | Medium |
| E54 | Zanussi | Means a motor-related fault where the motor is receiving power when it should be inactive, leading to issues with spinning or drum operation. It is usually caused by a motor relay contact sticking, low voltage being supplied to the motor, or a motor control circuit or PCB failure. | High |
E50High
Zanussi
Means a motor failure or motor-related fault, with the motor unable to drive the drum. It is usually caused by faulty motor carbon brushes, a broken belt, a failed motor, or a motor speed sensor tachometer fault.
E53Medium
Zanussi
Means a motor control circuit failure, specifically a fault with the motor triac sense circuit on the electronic PCB. It is usually caused by a damaged soldered link on the circuit board, a faulty motor, or wiring issues between them.
E54High
Zanussi
Means a motor-related fault where the motor is receiving power when it should be inactive, leading to issues with spinning or drum operation. It is usually caused by a motor relay contact sticking, low voltage being supplied to the motor, or a motor control circuit or PCB failure.
Don’t see your code? Different model years sometimes use different codes. Get in touch with our parts team and we’ll help you identify the right replacement.
05
Fitting Guidance
MediumGeneral fitting guidance. The exact steps can vary slightly with the make and model of your washing machine.
Safety: Switch off and unplug at the mains before you start.
You’ll needScrewdriver
- 1
- 2
- 3
- 4
- 5
- 6
- 7
06
Specifications
- Part Number
- 660513
- Genuine Spare Part
- Yes
07
More Details
This is a genuine washing machine belt.
Transfers power from the engine to the drum. Rotates it and then spins the damp clothes inside when the motor turns as rotational energy is transferred to it.
When the drum or agitator is not spinning or agitating properly, or if it's rotating inconsistently or sluggishly, it could be a failing belt.
If any of these symptoms are present, replace the washing machine belt.
This washing machine replacement belt is from Zanussi. It also fits Elektro Helios and Faure washing machines.
Before ordering, please verify that this washing machine belt fits your model using our compatibility checker.