Zanussi
Zanussi Washing Machine Door Seal Gasket1327756100
Suitable for Zanussi, Elektro Helios, Faure, Rosenlew, Zanker
Stock Code: 613979
·
£39.85inc. VAT
£33.21 ex. VAT
In Stock
Next Day Delivery Available
Moderate DIY repair
A confident home repairer can do this with basic tools.
01
Compatibility Check
02
What this part does
Creates a watertight seal between the drum and the door.
03
Will this fix my appliance?
Tick the symptoms your appliance is showing. We’ll tell you how confident we are this part is the fix.
04
Error codes related to this part
Error codes are model dependent, so the same brand may have more than one listed.
| Code | Brand | What it means | Confidence |
|---|---|---|---|
| E13 | Zanussi | Means an internal water leak has triggered the anti-flood device in the base of the machine. It is usually caused by a drain pump fault, a split hose, or a loose seal. | Medium |
| E42 | Zanussi | Means a door lock malfunction, specifically a problem with the door aperture closure mechanism. It is usually caused by damage or debris on the door lock assembly, with the same fault family covering E43 door interlock triac, E44 door closure sensing circuit, and E45 triac sensing circuit. | High |
| EF0 | Zanussi | Means the anti-flood system has been activated with water detected in the base tray, also reported as EFo or EF3. It is usually caused by excessive foam from over-soaping, a clogged drain filter, or a minor leak. | High |
| EF3 | Zanussi | Means the Aqua Control system has detected a water leak and activated safety mode. It is usually caused by over-sudsing, a damaged door seal, a filter blockage, or a leak into the base tray. | High |
E13Medium
Zanussi
Means an internal water leak has triggered the anti-flood device in the base of the machine. It is usually caused by a drain pump fault, a split hose, or a loose seal.
E42High
Zanussi
Means a door lock malfunction, specifically a problem with the door aperture closure mechanism. It is usually caused by damage or debris on the door lock assembly, with the same fault family covering E43 door interlock triac, E44 door closure sensing circuit, and E45 triac sensing circuit.
EF0High
Zanussi
Means the anti-flood system has been activated with water detected in the base tray, also reported as EFo or EF3. It is usually caused by excessive foam from over-soaping, a clogged drain filter, or a minor leak.
EF3High
Zanussi
Means the Aqua Control system has detected a water leak and activated safety mode. It is usually caused by over-sudsing, a damaged door seal, a filter blockage, or a leak into the base tray.
Don’t see your code? Different model years sometimes use different codes. Get in touch with our parts team and we’ll help you identify the right replacement.
05
Fitting Guidance
MediumGeneral fitting guidance. The exact steps can vary slightly with the make and model of your washing machine.
Safety: Switch off and unplug at the mains before you start.
You’ll needFlat screwdriver
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
06
Specifications
- Part Number
- 1327756100
- EAN / Barcode
- 7321422570357
- Genuine Spare Part
- Yes
07
More Details
Genuine door seal gasket for your washer door. Made of flexible rubber that stretches and compresses as needed. It’s resistant to water, detergent and strong against mechanical stress from opening and closing the door frequently.
Circular shape with flaps so you can install and remove it in the door assembly.
Seeing water leaks from your washing machine door? Check your rubber gasket. The rubber gasket creates a waterproof seal between the door and the washing machine drum.
Also prevents metal-on-metal contact since it acts as a buffer between the washing machine frame and the door.
This door seal gasket is from Zanussi. It also fits Elektro Helios, Faure, Rosenlew, Zanker, and Zoppas washing machines.
Before ordering, please verify that this part fits your model using our compatibility checker.
08
Customer Reviews (1)
5.01 review
5
1
4
0
3
0
2
0
1
0
washing machine door seal
Part arrived within two days well packed watched the online demos looked easy but was a real struggle You need strong thumbs I stripped off the front and lay the washer on its back as suggested on one of the videos this helped I also made some wooden pegs to twist fit between the seal and the concreat weight this held the seal so it did not pop off until its fully fitted need care not to damage new seal remove pegs happy to say it worked.
David Heald · Macclesfield ·
Quality
Value
Ease of Fitting
09
Questions & Answers (2)
Hi, Does this fit ZWF81240NW
Ogur · Sidcup, Kent ·
Hi Ogur, the door seal for your model is RS613980.
JordanStaff·
Hi does this fit on zanussi Mod: ZWF81441W Prod No: 914912316|01
Roshi · Edinburgh ·
Hi Roshi, the washing machine seal for your model is RS613980.
JordanStaff·