Next Day Delivery
Order by 4pm
Genuine Parts
Quality guaranteed
UK & Ireland
Fast shipping
Expert Help
Parts advice available
Universal
Stock Code: 121784
£10.08 ex. VAT
Pumps the waste water out through the drain hose.
Tick the symptoms your appliance is showing. We’ll tell you how confident we are this part is the fix.
General fitting guidance. The exact steps can vary slightly with the make and model of your washing machine.
Safety: Switch off and unplug at the mains before you start.
The dirty water in the washing machine is removed by a washing machine drain pump and put into the drain hose or plumbing system. The machine's drain cycle initiates the drain pump, which is normally found at the bottom of the device.
Blockages brought on by accumulated dirt and wear and tear from repeated use may lead to a malfunctioning washing machine drain pump. Electrical difficulties like poor wiring or loose connections, foreign objects getting into the pump, and issues with the motor like burned-out coils or mechanical failures all result in obstructions.
These problems can impair water flow, lessen pump performance, and cause poor drainage or drain pump failure.
This washing machine drain pump is a universal washing machine spare part. It will fit most commercial washing machines.
Specification:
If you need to replace the drain pump on your Hotpoint washing machine, we've got the video for you.
The following DIY repair video should assist you in fitting this part. However, the exact procedure may differ depending on your make and model.
Appliance and Part Number:
Great Price,Easy to fit and well packaged on delivery
Good Value and quality product. Easy to fit if confident enough. Well packaged on delivery.
I ordered this to replaced a failing pump motor in an LG washing machine, after being sent the wrong part by another supplier! It fitted and worked perfectly, no hassle. Thnak you.
The drain pump failed on the old Zanussi, but an Askol replacement from Ransom Spares soon had it operational again. While the machine is a bit like 'Trigger's brush' to keep it working for £10 ish is ano brainer. Easy to fit , 3 screws, although I had to cut off the old plug from the wiring loom and solder on two new spade terminals, 5 min job. Delivery was fast, no problems.
Fairly easy replacement for pump on AEG Lavamat 72600 (from 1997) with c2 error code. Wiring loom doesn't fit so needs adapter or just a get a couple of spade connectors as I did.
would this pump fit a zanussi 1z161 w
Hi Anne, this replacement pump replaces askoll/ plaset drain pumps that screw to the pump housing with 3 locators. I'd recommend checking your existing pump to be sure this would be compatible.
Hi will this part fit a beko WTG841M2B
Hi Alan, this replacement pump replaces askoll/ plaset drain pumps that screw to the pump housing with 3 locators - you'd need to check the connections on your existing pump to confirm if this would be compatible.
Would this fit a creda simplicity 1000 model no W 100 FW. Thank you.
Hi, you'd need to compare the fittings of your existing pump to this to see if you are able to fit it.
Can you confirm whether this will fit Whirlpool AWOE8758 serial no 8592 978 15000 please?
Hi Julian, the pump required for your model is RS208306.
will this fit a bosch wak28160gb/05 washing machine ?
Hi Martin, this is compatible if you currently have an askoll or plaset drain pump that connects to the pump housing with 3-screws.