Will This Part Fit My Appliance?

Choose your brand from the list below to check your model compatibility.

Start typing your model number below to check compatibility.

Suitable For Models Of

Balay, Bosch, Constructa, Gaggenau, Hitachi, Koenic, Lynx, Merker, Neff, Novamatic, Pitsos, Profilo, Schulthess, Siemens, Tecnik, Viva Washing Machines

Description

Manufacturers Part Number:

  • 00172686

Alternative Part Numbers:

  1. 00172686
  2. S09A
  3. SS-09A

Latest Product Review(s)

Read All Reviews
10 Customer Review(s)

Bearing Kit for Bosch Washing machine

Excellent service, right parts, arrived quickly, and the on-line video was spot-on! Many thanks

By Lawton - Maldon
6th Jan 2023

Overall

Quality

Value

Ease of Fitting

Bosch Bearing Kit

Good quality kit. Instructions not the best and had to resort to you tube for exact guidance on how to disassemble the drum. Plastic clips have to be broken off and replaced with supplied screws so fitting is a little complicated and needs caution.

By Andrew Buss - Sutton Coldfield
6th Sep 2022

Overall

Quality

Value

Ease of Fitting

Everything required to replace bearings

Although it's not a simple job, I replaced the drum and bearings on my Bosch machine. When separating the outer drum the exisiting plastic clips have to be broken off. When reassembling, the screws provided with this kit are used in addition to the existing ones, in the unused holes, to ensure a good seal. Tightening opposite screws together helps to give an even seal too. I also added some silicone sealant to the new outer drum seal before fitting. With care, tapping out and refitting the bearings was fairly straightforward, using a hammer and screwdriver/cold chisel. The end result was a working, quiet machine with no leaks!

By Tim - Northampton
9th May 2021

Overall

Quality

Value

Ease of Fitting

Quality product, big job to fit

Replaced bearings on Bosch washing machine. Str*p down and beaning replacement probably took about 5 hours. Cleaning drum, soap tray and element a lot longer . . . This is a big Job, don't be fooled, you will be str*pping down the machine just about as much as you can. Luckily there was a YouTube video featuring this repair on a very similar Bosch model to the one that I was working on. I would not say it is a particularly difficult job, just time consuming and requiring patience and a reasonable amount of space to work in, and of course the tools to the job. The most time consuming part was cleaning the drum spider and heating element, which are things that should be done when the machine is in such a state of disassembly. A few days in post-repair, and a lot of catch-up washes later, the machine is working well - water tight and quiet as the day we first bought the machine. So all in all worth the trouble. Let's just hope that the repair stands the test of time.

By Paul - Farnham
16th Mar 2018

Overall

Quality

Value

Ease of Fitting

Excellent item

Very time consuming to fit (no fault of the parts, just the job itself). Took me, a novice, around 5hrs to complete the whole job. If like me you needed to cut the tabs off the tub, I would recommend a Dremel with a cutting blade to make this job much easier than using a pair of pliers as suggested. Time required aside, good kit with all the extras required including extra screws to hold the tub together.

By Davy Arthurs - Glos
15th Nov 2017

Overall

Quality

Value

Ease of Fitting

Quality Part

I was initially concerned when I ordered this bearing that it might not fit my washing machine as I had been informed by another spares website that a replacement was not available. However, a guy at ransomspares assured we that it was compatible and I am pleased to say everything went to plan and my 15 year old Bosch washing machine is now running as well as it did when it was new! I would definitely recommend, but don't underestimate the work involved. Replacing the bearings themselves was not too bad and took less than an hour. These are clearly quality parts. However, the total job, including cleaning and descaling took me about 12 hours. As this was the first time I have done this, I was deliberately taking my time and could probably do in half the time now. If you have the space, patience, and a reasonable level of skill at dismantling (and reassembling!) things then I would certainly recommended. Not only has this saved me about £300 compared with buying the equivalent machine, I have not had to thow away something where over 90% of the components are working fine - far more sustainable!

By Hugh Ferguson - Brigg
17th Jun 2017

Overall

Quality

Value

Ease of Fitting

Bearing Kit

Perfect fit and excellent service! Was able to fit the parts easily and fitted without any issues

By Jonathan Galea - Malta
24th Nov 2016

Overall

Quality

Value

Ease of Fitting

perfect et of parts

Completed fitting newl bearings seals on siemen washing machine in approx 4 hrs Machine now like new Recomend to watch youtube before starting and be methodical

By David Roberts - Mynydd Isa
15th Aug 2016

Overall

Quality

Value

Ease of Fitting

Not for the feint hearted

Machine is working well again and although I have given 5 stars for ease of fitting that is not quite correct. However that is not the fault of the supplier or the part; it is simply a big job which needs lots of space and patience. You tube and a camera phone are an essential pre requisite and a lot of coffee.. Make very simple notes about the order you did things then make sure you refollow and check everything twice when you re-make the connections.

By Mr Frank Bird - Penarth
18th Aug 2014

Overall

Quality

Value

Ease of Fitting

Great service

As usual great service, parts arrived promptly even with the Christmas post. Changing the bearings was a big job, but with the help of you tube,went to plan. Thanks

By Matt - stansted
4th Jan 2013

Overall

Quality

Value

Ease of Fitting

Load More Reviews

Questions And Answers

1 Answer(s)
I have a Siemens XLM 1200 Washing machine. On the inside of the door at the top are the following number WFL 2021GR/01 and D 8402 60/03. Searching for the bearing using the Siemens name fails to find the model number. Searching just the model number WFL 2021GR/01 finds your company and a Bosch washing machine. Are you able to confirm that this drum bearing will fit my machine
By Stephen - Stourbridge - 17/11/2020
Hi Stephen, I can confirm this drum bearing kit is correct for your model.
By Jordan - Staff Member
1 Answer(s)
I have a Siemens XLM 1200 Washing machine. On the inside of the door at the top are the following number WXLM1260GB/27 FD 8412 60156. Please confirm if this kit will fit. Thank you.
By Pavinder - London - 20/05/2021
Hi Pavinder, I can confirm this bearing kit is correct for your model.
By Jordan - Staff Member
1 Answer(s)
Hello I have a Bosch Nr WIS28441/GB54 FD 9502 200249, will this kit fit? Kind regards, Garry
By Garry - Cumbria - 19/08/2021
Hi Garry, the bearing and seal kit required for your washing machine is RS58868.
By Jordan - Staff Member
1 Answer(s)
Hi, is this a genuine bearing same as the manufacturer uses on assembly?
By Gaz - Wolverhampton - 15/11/2021
Hi Gaz, I can confirm this is the genuine bearing kit, sourced directly from Bosch.
By Jordan - Staff Member
1 Answer(s)
Hello, could you confirm if this kit will fit a Bosch WAN28201GB/26 washing machine. Thanks Darren.
By Darren - Chester - 14/02/2023
Hi Darren, the bearings for your model are only available complete with the rear tub. This is our part number RS849154.
By Jordan - Staff Member

Be the first to ask a question for this product.

Ask a new question

Customers Also Viewed