Next Day Delivery Available
Bosch Washing Machine Door Seal Rubber Gasket
Suitable For Models Of: Balay, Bosch, Constructa, Koenic, Lord, Lynx, Neff, Novamatic, Pitsos, Profilo, Schulthess, Sharp, Siemens, Viva, Zelmer Washing Machines Read More
Will This Part Fit My Appliance?
Choose your brand from the list below to check your model compatibility.
Start typing your model number below to check compatibility.
Description
What is the mechanism of the door seal rubber gasket?
Between the drum and the washing machine's outside shell, the door seal serves as a seal. When the door is closed, it forms a tight seal that stops water from leaking while the washing and spinning cycles are running.
It keeps the machine's efficiency and guards against any water damage by trapping the water inside.
When should I replace the door seal rubber gasket?
Replace the door seal on your washing machine if you notice any signs of wear, damage, or leakage. Over time, the door seal becomes stiffer, wears down, or develops rips.
This causes water leaks throughout the washing process, which may injure your floors or the area around the machine's and reduce its functionality.
How do you replace the door seal on a washing machine?
Watch our DIY video on how to replace a washing machine door seal.
This washing machine door seal is a genuine Bosch washing machine spare part. It also fits Balay, Constructa, Koenic, Lynx, Neff, Pitsos, Profilo, Siemens, and Viva washing machines.
How to replace a Washing Machine Door Seal:
The following DIY repair video should assist you in fitting this part. However the exact procedure may differ depending on your make and model.
Safety Warning - Always unplug from the mains before carrying out any repairs.
Latest Product Review(s)
Easy to find correct part
Model designation search lead straight to this part, so correct part ordered and arrived with no fuss. Easy enough to fit the part itself, however the springs that hold it in are a different matter altogether, but go in with a bit of perseverance. Broken machine now fixed and back in full use
Product worked pefectly
Product was exactly as described. Website was helpful in determining which one I needed for my model of washing machine. I won’t lie, it was a challenge to fit this on my own, but the video provided on the site was v helpful.
Good value product and easy to fit
Quick to deliver , good comparative price and no issues installing
Door seal successfully replaced
The replacement process was straightforward once the front of the washing machine had been removed. It was not obvious how to remove the lowest front cover alongside the drain plug and it would be helpful if there was a guide to the fixings used in each model, this was WAE24367GB/34; it is impractical to give all variations in a video dealing with the main subject. As usual, Ray's explanation was good. With this washer it was not necessary to remove the top of the machine as the bolt securing the steel band round the weight was unscrewed from below by a 8mm hex socket and adapter from quarter to half inch for a ratchet driver. The actual replacement of the seal was easy and reassembly straightforward, the spring securing the seal against the drum surround and weight were easily replaced and the shorter wire which compressed the seal against the door aperture had a spring which fitted neatly back between the hinges.
Tricky to fit, but worth it
After a few leaks, we finally found a small split in the bottom of our washing machine door gasket. This part was a perfect replacement. Could not find a YouTube video showing how to replace it on our exact model. Eventually had to remove the top (2 screws), then the control panel (2 screws and some plastic clips), and then the front panel (3 screws at the front and 2 underneath) to get clear access to the rear spring that holds the gasket in place around the drum. Probably took about an hour in total. I'm sure a professional would be able to do it without all that messing about! Washing machine model = WAN24100GB. We needed a T20 torx screwdriver bit for most of the screws, and a small hex driver for two screws underneath that secure the front panel.
Easy as pie !!!!!!!!!!
Ordered the parts and they arrived very quickly. Excellent price that I was more than happy with. The `youtube` type video showed me how to fit the part myself and saved me the price of a tradesman. Video was easy to follow and although the machine was not exactly the same, the principles were clear. All in all I was completely happy with the product, the price and the idiots guide to doing the work myself. I would definitely deal with these guys again. 10 stars !!!!
Genuine Part fits perfectly
This gasket fits perfectly and is identical to original that I have removed. Straightforward to fit after watching excellent ransomspares video beforehand. Price was cheaper for same part on Bosch's main site also.
Easy fix
Quick delivery, fits perfectly, very easy to fit. Washing machine is like new again! If you are not sure how to do it, there are several clear videos on the web.
Bosch door seal gasket
Item supplied by post promptly, website easy to navigate. This original part was pretty easy to fit even though the machine is a good few years old, there are lots of online videos to assist. Main requirement is star bit screwdrivers to remove the machine front and pliers to attach the water supply pipe to it.
great product
Great product, good quality take your time to fit the seal