Indesit
Indesit Washing Machine NTC Sensor 481010906691
Suitable for Indesit, Ariston, Creda, Hotpoint, Nordmende
Stock Code: 886501
£16.45inc. VAT
£13.71 ex. VAT
In Stock
Next Day Delivery Available
Does this part fit my appliance?
Check compatibility with your model number
01
Specifications
- Part Number
- 481010906691
- Alternative Part Numbers
- C00083915, C00508678
- EAN / Barcode
- 8015250654806
- Genuine Spare Part
- Yes
02
Description
What does an NTC sensor do?
It accurately measures water temperature during wash cycles. Also prevents overheating by signalling the control system when the water reaches the set temperature.
This NTC sensor for your washing machine is from Indesit. Also fits Ariston, Creda, Hotpoint, Nordmende, Scholtes, and Whirlpool washing machines.
What happens if my NTC sensor is faulty?
Damage to a sensor can result in incorrect water temperatures, error codes, longer wash cycles, or a failure to heat the water, indicating it may need repair or replacement. Change it with this replacement part.
03
Video
How to replace a washing machine NTC sensor
If you need to replace the NTC sensor on your washing machine, we've got the video for you.
The following DIY repair video should assist you in fitting this part. However, the exact procedure may differ depending on your make and model.
Appliance and Part Number:
- Washing machine model used - Hotpoint NSWM743UWUK
- Part number used - RS886501
Need to find a specific part of the video? Use the timestamps below...
- 0:14 - Tools needed
- 0:22 - Remove screws and rear panel
- 0:39 - Where to find the NTC sensor on the washing machine
- 0:42 - Remove electrical connector on NTC sensor
- 0:46 - Loosen 8mm nut on washing machine element
- 0:57 - Give the bolt on the element a sharp hit to loosen the seal
- 1:01 - How to remove element from washing machine
- 1:07 - Remove NTC sensor
- 1:18 - Install new NTC sensor
- 1:30 - Re-attach electrical connector to NTC sensor
- 1:33 - Insert element back into washing machine drum
- 1:42 - Tighten 8mm nut on washing machine element
- 1:50 - Check electrical connectors are on securely
- 1:58 - Re-attach rear panel and screws