Indesit Washing Machine Drain Water Hose 1820mmC00091775

Ariston

Means a pump circuit failure where the machine cannot empty water from the drum because the pump is blocked, faulty, or disconnected. It is usually caused by a blocked or jammed filter, a faulty pump, or a drainage problem.

Ariston

Means a critically high water level, or on top loading models a drum position sensor fault, where the machine cannot drain or has detected too much water. It is usually caused by a blockage, a faulty door lock, or a faulty sensor.

Ariston

Means a drainage issue or a level sensor error. It is usually caused by a blocked drain pump, a kinked drain hose, or a faulty pressure sensor.

Ariston

Means a drainage failure where the machine cannot empty water. It is usually caused by a blocked drain filter behind the bottom panel, a kinked hose, or a clogged pump.

Hotpoint

Means a pump circuit fault, where the machine cannot drain water. It is usually caused by a blockage in the filter, a faulty drain pump, or faulty wiring.

Hotpoint

Means a door lock mechanism failure or a serious drainage problem, where the door lock may be faulty, buzzing, or failing to engage. It is usually caused by a faulty door lock or the pump failing to empty the drum.

Hotpoint

Means a drainage failure, where the machine cannot empty water and often leaves clothes wet. It is usually caused by a blockage in the pump filter, the drain hose, or the plumbing.

Indesit

Means a serious fault with the drain pump, where the machine cannot communicate with the pump and fails to drain. It is usually caused by a missing or faulty connection in the pump circuit, a faulty pump, a blockage, or a jammed filter.

Indesit

Means a drain pump circuit failure, where the machine cannot detect the pump or water is not draining. It is usually caused by a blockage, a faulty pump, or a wiring issue.

Indesit

Means a drainage failure, where the machine cannot empty water and stops mid-cycle with water inside. It is usually caused by a blocked filter, an obstructed drain hose, or a jammed pump impeller from coins, debris, or lint buildup.

Whirlpool

Means a long drain error where the machine is taking too long to empty water, or a water inlet fault, shown as E1, F9, or E1F9. It is usually caused by a clogged drain pump filter, a kinked drain hose, or low water pressure.

Whirlpool

Means a drainage failure where the washer takes over 8 minutes to drain water, or a water level sensor fault, displayed as F02 or F2E3. It is usually caused by a clogged pump filter, a kinked drain hose, or a faulty drain pump.

Whirlpool

Means a long drain condition where the washer is taking too long to drain water. It is usually caused by a clogged drain pump filter, a kinked hose, or a faulty pump.

Whirlpool

Means a drainage fault shown as F4E4, a door lock fault shown as F4E1, or a heating element failure on certain front-load models. It is usually caused by a clogged pump filter, a restricted drain hose, a faulty drain pump, or a door lock fault.

Whirlpool

Means a long drain error where the washer cannot drain water within the expected time, usually over 8 minutes, shown as F9 E1. It is usually caused by a clogged drain pump filter, a kinked or blocked drain hose, or a faulty drain pump.

Whirlpool

Means a long drain error where the washer cannot drain water fast enough or at all. It is usually caused by a blocked drain pump filter, a kinked hose, or a failing pump.