Indesit
Indesit Washing Machine Cold Water Inlet Fill Valve921258
Suitable for Indesit, Ariston, Hotpoint, Scholtes, Whirlpool
Stock Code: 921258
£6.95inc. VAT
£5.79 ex. VAT
In Stock
Next Day Delivery Available
Moderate DIY repair
A confident home repairer can do this with basic tools.
01
Compatibility Check
02
What this part does
Controls the water flowing into the machine.
03
Will this fix my appliance?
Tick the symptoms your appliance is showing. We’ll tell you how confident we are this part is the fix.
04
Error codes related to this part
Error codes are model dependent, so the same brand may have more than one listed.
| Code | Brand | What it means | Confidence |
|---|---|---|---|
| A9 | Indesit | Means a water inlet problem, where the machine is not receiving water or not filling sufficiently. It is usually caused by a water inlet fault, a jammed filter, or an open or short circuit on the main wash triac affecting motor control. | High |
| E1 | Indesit | Means a water intake failure, where the machine cannot detect enough water in the drum within the allotted time. It is usually caused by a water inlet fault, a valve not closing, or a door lock issue. | High |
| F8 | Whirlpool | Means the washer is not detecting the correct amount of incoming water as F8 E1 or Lo FL, while the F08 variant means the heater relay is not being activated. It is usually caused by a water inlet fault, a faulty pressure sensor, a faulty heater relay, or loose module connections. | High |
| F8E1 | Whirlpool | Means a long fill or no fill fault where the washer is not detecting enough water entering the tub, also shown as LoFL. It is usually caused by low water pressure, kinked hoses, or clogged inlet screens. | High |
A9High
Indesit
Means a water inlet problem, where the machine is not receiving water or not filling sufficiently. It is usually caused by a water inlet fault, a jammed filter, or an open or short circuit on the main wash triac affecting motor control.
E1High
Indesit
Means a water intake failure, where the machine cannot detect enough water in the drum within the allotted time. It is usually caused by a water inlet fault, a valve not closing, or a door lock issue.
F8High
Whirlpool
Means the washer is not detecting the correct amount of incoming water as F8 E1 or Lo FL, while the F08 variant means the heater relay is not being activated. It is usually caused by a water inlet fault, a faulty pressure sensor, a faulty heater relay, or loose module connections.
F8E1High
Whirlpool
Means a long fill or no fill fault where the washer is not detecting enough water entering the tub, also shown as LoFL. It is usually caused by low water pressure, kinked hoses, or clogged inlet screens.
Don’t see your code? Different model years sometimes use different codes. Get in touch with our parts team and we’ll help you identify the right replacement.
05
Fitting Guidance
MediumGeneral fitting guidance. The exact steps can vary slightly with the make and model of your washing machine.
Safety: Switch off at the mains and turn off the water supply before you start.
You’ll needScrewdriverPliersTowel
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
06
Specifications
- Part Number
- 921258
- Genuine Spare Part
- No
- C00110333
07
More Details
This is a high quality water inlet fill valve for regulating cold water flow in your washing machine. Made of plastic and metal. Fits seamlessly with your washing machine’s water supply system.
The valve only opens when the wash cycle starts. It's only there that cold water flows in, mixes with the detergent and washes your clothes in the drum.
Also acts as a safety mechanism when there’s excessive water pressure or leaks. It shuts off the water supply to the machine. Very much efficient for taking cold water in.
This cold water inlet fill valve fits Ariston, Hotpoint, Indesit, Scholtes, and Whirlpool washing machines.
Before ordering, please verify that this part fits your model using our compatibility checker.