Hotpoint
Hotpoint Washing Machine Triple Solenoid Fill ValveC00110331
Suitable for Hotpoint, Ariston, Indesit, Scholtes, Whirlpool
Stock Code: 7065
£16.50inc. VAT
£13.75 ex. VAT
In Stock
Next Day Delivery Available
Moderate DIY repair
A confident home repairer can do this with basic tools.
01
Compatibility Check
02
What this part does
Controls the water flowing into the machine.
03
Will this fix my appliance?
Tick the symptoms your appliance is showing. We’ll tell you how confident we are this part is the fix.
04
Error codes related to this part
Error codes are model dependent, so the same brand may have more than one listed.
| Code | Brand | What it means | Confidence |
|---|---|---|---|
| A9 | Indesit | Means a water inlet problem, where the machine is not receiving water or not filling sufficiently. It is usually caused by a water inlet fault, a jammed filter, or an open or short circuit on the main wash triac affecting motor control. | High |
| E1 | Indesit | Means a water intake failure, where the machine cannot detect enough water in the drum within the allotted time. It is usually caused by a water inlet fault, a valve not closing, or a door lock issue. | High |
| F8 | Whirlpool | Means the washer is not detecting the correct amount of incoming water as F8 E1 or Lo FL, while the F08 variant means the heater relay is not being activated. It is usually caused by a water inlet fault, a faulty pressure sensor, a faulty heater relay, or loose module connections. | High |
| F8E1 | Whirlpool | Means a long fill or no fill fault where the washer is not detecting enough water entering the tub, also shown as LoFL. It is usually caused by low water pressure, kinked hoses, or clogged inlet screens. | High |
A9High
Indesit
Means a water inlet problem, where the machine is not receiving water or not filling sufficiently. It is usually caused by a water inlet fault, a jammed filter, or an open or short circuit on the main wash triac affecting motor control.
E1High
Indesit
Means a water intake failure, where the machine cannot detect enough water in the drum within the allotted time. It is usually caused by a water inlet fault, a valve not closing, or a door lock issue.
F8High
Whirlpool
Means the washer is not detecting the correct amount of incoming water as F8 E1 or Lo FL, while the F08 variant means the heater relay is not being activated. It is usually caused by a water inlet fault, a faulty pressure sensor, a faulty heater relay, or loose module connections.
F8E1High
Whirlpool
Means a long fill or no fill fault where the washer is not detecting enough water entering the tub, also shown as LoFL. It is usually caused by low water pressure, kinked hoses, or clogged inlet screens.
Don’t see your code? Different model years sometimes use different codes. Get in touch with our parts team and we’ll help you identify the right replacement.
05
Fitting Guidance
MediumGeneral fitting guidance. The exact steps can vary slightly with the make and model of your washing machine.
Safety: Switch off at the mains and turn off the water supply before you start.
You’ll needScrewdriverPliersTowel
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
06
Specifications
- Part Number
- C00110331
- Alternative Part Numbers
- C00097391
- EAN / Barcode
- 8052476103312
- Genuine Spare Part
- Yes
07
More Details
This is a genuine triple solenoid fill valve replacement for your washing machine.
Regulates the flow of water into the machine through three separate lines. It controls the filling of different compartments for hot, cold, and warm water.
When damaged, you’ll notice leaks around the valve, inconsistent water flow, failure to fill with the correct temperature water, and error codes related to water supply issues. Change it with this replacement part.
This triple solenoid fill valve for your washing machine is from Hotpoint. Also fits Ariston, Indesit, Scholtes, and Whirlpool washing machines.
Before ordering, please verify that this part is suitable for your model using our compatibility checker.
08
Customer Reviews (8)
5.08 reviews
5
8
4
0
3
0
2
0
1
0
Sort by:||
Fast & Easy
Rapid delivery and easy to fit with only a screwdriver, pliers and wrench.
John Carter · LEAMINGTON SPA ·
Quality
Value
Ease of Fitting
Good value for money
Smooth delivery and the part was easy to install, I just postponed to buy a new one.
Luke · London ·
Quality
Value
Ease of Fitting
Washer dryer drying issue
This solenoid valve help me to solve the mystery of drying clothes which used to be wet and warm clothes end of the each drying cycle. My indesit washer dryer is 10 years old so I googled what other people says about the same kind of problem. Only one person mentioned that some solenoid valves failed the even though its resistance between 3000-4500 Omhs. When I checked the new unit got higher resistance than the original it had. So I guess it’s functionality was faded with time. This unit was exactly the same it got. Easy to replace. There are enough videos on the you tube to demonstrate how to do it.
Prabath · Milton Keynes ·
Quality
Value
Ease of Fitting
Easy repair for washing machine
Washing machine had been sat in a shed, the frost had cracked the inlet valve. A cheap and easy to fit replacement meant the machine has a new lease of life. Too many appliances thrown away when an easy fix will keep them going.
Rob Wells · Penrith ·
Quality
Value
Ease of Fitting
Perfect Fit
This is the first tme i have repaired a washine machine myself, the inlet valve was easily fitted and resolved the issue with the machine not filling with water. Will use Ransom Spares when the need arises
Michael Robinson · DUNDONALD ·
Quality
Value
Ease of Fitting