Hotpoint
Hotpoint Washing Machine Heater ElementC00112578
Suitable for Hotpoint, Ariston, Creda, Export, Indesit
Stock Code: 1042
·
£28.80inc. VAT
£24.00 ex. VAT
In Stock
Next Day Delivery Available
Moderate DIY repair
A confident home repairer can do this with basic tools.
01
Compatibility Check
02
What this part does
Heats the wash water to the selected programme temperature.
03
Will this fix my appliance?
Tick the symptoms your appliance is showing. We’ll tell you how confident we are this part is the fix.
04
Error codes related to this part
Error codes are model dependent, so the same brand may have more than one listed.
| Code | Brand | What it means | Confidence |
|---|---|---|---|
| F14 | Ariston | Means the machine cannot heat the water to the required temperature during a cycle. It is usually caused by a faulty heating element, damaged wiring, or a main control board fault. | High |
| F19 | Ariston | Means the machine is taking too long to heat up, or on washer dryer models the dryer fan is not operating correctly. It is usually caused by a heating fault, a control board fault, or wiring damage. | High |
| F7 | Ariston | Means the machine fails to heat water, leading to incomplete cycles or a complete halt in operation. It is usually caused by a heating element that is not activating or a heater relay stuck on the main circuit board. | High |
| F8 | Ariston | Means a heating system fault where the machine cannot heat. It is usually caused by a heater relay that cannot be activated, a failed heating element, or a connection issue between the sensor and the control board. | High |
| F13 | Hotpoint | Means a dryer sensor fault on washer-dryer models, where the dryer NTC thermistor is faulty, disconnected, or the unit has overheated. It is usually caused by the temperature sensor, wiring damage, or a fouled airflow system. | Medium |
| F14 | Hotpoint | Means a drying heater failure on washer-dryer models, where the machine cannot heat up during the drying cycle. It is usually caused by a faulty heating element, a tripped thermostat, or broken wiring. | Medium |
| F7 | Hotpoint | Means a heater relay fault, where the heating element relay on the circuit board is stuck and the water is not heating. It is usually caused by a faulty heater, wiring issues, or a malfunctioning main control board. | High |
| F8 | Hotpoint | Means a heater circuit fault, where the machine may stop mid-cycle, show cold water, or fail to start. It is usually caused by a failed heating element, a wiring issue, or a stuck relay on the PCB. | High |
| F13 | Indesit | Means a dryer temperature sensing fault on washer-dryer models that stops the machine heating or monitoring the air during the drying cycle. It is usually caused by a faulty dryer NTC sensor, damaged wiring, or a malfunctioning heater. | High |
| F14 | Indesit | Means the dryer system is not heating on washer-dryers, with an open or short circuit detected. It is usually caused by a failed dryer heating element, thermostat, or related wiring. | High |
| F7 | Indesit | Means a heater relay fault, where the machine detects the heater is on when it should not be or the heating circuit has failed. It is usually caused by a stuck relay on the main PCB, a failed heater element, or faulty wiring. | High |
F14High
Ariston
Means the machine cannot heat the water to the required temperature during a cycle. It is usually caused by a faulty heating element, damaged wiring, or a main control board fault.
F19High
Ariston
Means the machine is taking too long to heat up, or on washer dryer models the dryer fan is not operating correctly. It is usually caused by a heating fault, a control board fault, or wiring damage.
F7High
Ariston
Means the machine fails to heat water, leading to incomplete cycles or a complete halt in operation. It is usually caused by a heating element that is not activating or a heater relay stuck on the main circuit board.
F8High
Ariston
Means a heating system fault where the machine cannot heat. It is usually caused by a heater relay that cannot be activated, a failed heating element, or a connection issue between the sensor and the control board.
F13Medium
Hotpoint
Means a dryer sensor fault on washer-dryer models, where the dryer NTC thermistor is faulty, disconnected, or the unit has overheated. It is usually caused by the temperature sensor, wiring damage, or a fouled airflow system.
F14Medium
Hotpoint
Means a drying heater failure on washer-dryer models, where the machine cannot heat up during the drying cycle. It is usually caused by a faulty heating element, a tripped thermostat, or broken wiring.
F7High
Hotpoint
Means a heater relay fault, where the heating element relay on the circuit board is stuck and the water is not heating. It is usually caused by a faulty heater, wiring issues, or a malfunctioning main control board.
F8High
Hotpoint
Means a heater circuit fault, where the machine may stop mid-cycle, show cold water, or fail to start. It is usually caused by a failed heating element, a wiring issue, or a stuck relay on the PCB.
F13High
Indesit
Means a dryer temperature sensing fault on washer-dryer models that stops the machine heating or monitoring the air during the drying cycle. It is usually caused by a faulty dryer NTC sensor, damaged wiring, or a malfunctioning heater.
F14High
Indesit
Means the dryer system is not heating on washer-dryers, with an open or short circuit detected. It is usually caused by a failed dryer heating element, thermostat, or related wiring.
F7High
Indesit
Means a heater relay fault, where the machine detects the heater is on when it should not be or the heating circuit has failed. It is usually caused by a stuck relay on the main PCB, a failed heater element, or faulty wiring.
Don’t see your code? Different model years sometimes use different codes. Get in touch with our parts team and we’ll help you identify the right replacement.
05
Fitting Guidance
MediumGeneral fitting guidance. The exact steps can vary slightly with the make and model of your washing machine.
Safety: Switch off and unplug at the mains and let it cool before you start.
You’ll needScrewdriverNut driver or socket
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
06
Specifications
- Part Number
- C00112578
- Alternative Part Numbers
- 1604486, C00112690, C00201875, HPTC00112578
- EAN / Barcode
- 8052476125789
- Genuine Spare Part
- Yes
07
More Details
Genuine water heater element for your washing machine. It’s made with stainless steel that generates heat when electricity flows through it.
The heater element warms up the water used for your clothes during the wash cycle. Just the right temperature to get your clothes sparkling clean after they’ve been washed. If you're using hot water, it helps dissolve detergent and remove stains more effectively.
So if the washing machine isn’t heating water properly or if cycles are taking longer than usual, you need to replace your heater element.
Check out our DIY video guide below to help you replace your heater element.
This water heater element is from Hotpoint. Also fits Ariston, Creda, Export, and Indesit washing machines.
Before ordering, please verify that this part is suitable for your model using our compatibility checker.
08
Video
How to replace a Washing Machine Heater Element:
The following DIY repair video should assist you in fitting this part. However the exact procedure may differ depending on your make and model.
Safety Warning - Always unplug from the mains before carrying out any repairs.
09
Customer Reviews (10)
4.910 reviews
5
9
4
1
3
0
2
0
1
0
Sort by:||
Good product
Original product in a really good price. Easy to fit.
GREG MORAITIS · Poole ·
Quality
Value
Ease of Fitting
Great product and easy to fit
Great product and easy to fit. Reasonably priced.
Dawn Nicholls · Widnes ·
Quality
Value
Ease of Fitting
Good item
Good value and does what it’s supposed to. It was easy to fit and packaging it arrived in was substantial
D.Harrington · Aylesbury ·
Quality
Value
Ease of Fitting
Great product
Great product, excellent quality and the very good value for your money. It was delivered within a couple of days and took for me only about 10 mins to fit it. My washing machine is back to normal now.😊
Vitaliy Vityuk · West Drayton ·
Quality
Value
Ease of Fitting
Cheap fix
I got this part in the hope to fix my washing machine as the wash cycle was going on for ages.i fitted this part and by magic my washing machine is working perfect again.not bad for the really cheap price.so happy with it.
Sarah blake · West Lothian ·
Quality
Value
Ease of Fitting
10
Questions & Answers (1)
Does this part come with the thermistor? Thanks.
Oliver · Oxfordshire ·
Hi Oliver, yes this is supplied with the element.
JordanStaff·