Hotpoint
Hotpoint Washing Machine Dispenser HoseC00379313
Suitable for Hotpoint, Indesit, Whirlpool
Stock Code: 822501
·
£14.85inc. VAT
£12.38 ex. VAT
In Stock
Next Day Delivery Available
Moderate DIY repair
A confident home repairer can do this with basic tools.
01
Compatibility Check
02
What this part does
Carries the detergent and water from the drawer into the tub.
03
Will this fix my appliance?
Tick the symptoms your appliance is showing. We’ll tell you how confident we are this part is the fix.
04
Fitting Guidance
MediumGeneral fitting guidance. The exact steps can vary slightly with the make and model of your washing machine.
Safety: Switch off and unplug at the mains before you start.
You’ll needScrewdriverPliers
- 1
- 2
- 3
- 4
- 5
- 6
- 7
05
Specifications
- Part Number
- C00379313
- EAN / Barcode
- 8058331793131
- Genuine Spare Part
- Yes
06
More Details
What does a washing machine dispenser hose do?
The dispenser hose is the part that connects the detergent compartment and the main tank or drum tub of your washing machine.
It carries the detergent from where it's stored to where it's needed during the wash cycle. Just the right amount dispensed so no extra detergent is wasted and gets your laundry clean every cycle.
This is a genuine washing machine dispenser hose. Made with durable plastic to withstand water pressure and movement every wash cycle.
This hose dispenser for your washing machine is from Hotpoint. Also fits Indesit and Whirlpool washing machines.
Before ordering, please verify with our compatibility checker that this part is suitable for your model.
07
Video
How to replace a washing machine dispenser hose
If you need to replace a dispenser hose, we've got the video for you.
The following DIY repair video should assist you in fitting this part. However, the exact procedure may differ depending on your make and model.
Appliance and Part Number:
- Washing machine model used - Hotpoint NSWM743UWUK
- Part number used - RS822501
Need to find a specific part of the video? Use the timestamps below...
- 0:14 - Tools needed
- 0:24 - Remove screws and washing machine lid
- 0:34 - Remove screws holding dispenser drawer to water inlet fill valve
- 0:44 - Remove screws and top tie bar
- 0:54 - Remove screws holding control panel in place
- 1:01 - Remove screws holding control panel to dispenser drawer
- 1:09 - Remove soap drawer
- 1:16 - Unclip and remove control panel
- 1:39 - Remove dispenser drawer from water inlet fill valve
- 1:46 - Remove old dispenser hose from dispenser drawer
- 1:58 - Remove old dispenser hose from washing machine drum
- 2:09 - Unpack your new dispenser hose
- 2:19 - How to attach your new dispenser hose to the washing machine
- 2:57 - Lubricate dispenser hose with washing up liquid
- 3:01 - Attach dispenser drawer to new dispenser hose
- 3:06 - Hook band from new dispenser hose to dispenser drawer
- 3:14 - Attach dispenser drawer to water inlet fill valve
- 3:26 - Re-attach control panel
- 3:58 - Re-screw screws from control panel to new dispenser drawer
- 4:06 - Attach soap drawer
- 4:22 - Re-attach top tie bar and re-screw screws
- 4:34 - Re-screw screws into the dispenser drawer and water inlet fill valve
- 4:40 - Re-attach washing machine lid
- 4:49 - Re-screw screws for washing machine lid
08
Customer Reviews (2)
5.02 reviews
5
2
4
0
3
0
2
0
1
0
Well made hose at a good price
Our 10 year old Indesit washing developed a leak. After some investigation concluded this hose was leaking where it enters the drum. Having used Ransome before, ordered a replacement on click and collect as they are based where I live. Well made hose identical to the original. Due its location not that easy to fit but got there in the end. Leak cured, one happy wife!
Mike · Yeovil ·
Quality
Value
Ease of Fitting
The right part
Washing machine had developed a leak which was found to be the hose between the detergent drawer and the drum which had started to go brittle and break up. A bit fiddly to replace as there's not much space but it was a perfect fit and has cured the leak.
Peter Gentry · Basildon ·
Quality
Value
Ease of Fitting
09
Questions & Answers (3)
Hi will this part fit Hotpoint WMUD843 PXUK Thanks..
Simon · Stanley ·
Hi Simon, the dispenser to drum hose listed for your model is RS495835.
JordanStaff·
Hello! I have a hotpoint BHWM129 and need a replacement flexi from the dispenser to the drum...I've checked your website and the part for the BHWM129UK1 looks more like my existing one than the reccomended replacement from the search function for the BHWM129. Can you advise? Many thanks
Stephen · Harlow ·
Hi Stephen, the hose required for your model is RS6372.
JordanStaff·
Hi I have a hotpoint aqualtis AQXGD169PM and require a hose from the dispenser to the drum. Will this part fit my machine?
Nick · Lincs ·
Hi Nick, the hose required for your model is RS388244.
JordanStaff·