Hoover
Hoover Washing Machine Motor41049777
Suitable for Hoover, Candy, Haier, Rosieres
Stock Code: 910573
£90.25inc. VAT
£75.21 ex. VAT
In Stock
Next Day Delivery Available
Moderate DIY repair
A confident home repairer can do this with basic tools.
01
Compatibility Check
02
What this part does
Turns the drum during the wash and spin cycles.
03
Will this fix my appliance?
Tick the symptoms your appliance is showing. We’ll tell you how confident we are this part is the fix.
04
Error codes related to this part
Error codes are model dependent, so the same brand may have more than one listed.
| Code | Brand | What it means | Confidence |
|---|---|---|---|
| E6 | Candy | Means a motor failure, a faulty door lock, or a motor circuit fault, where the motor is not turning. It is usually caused by a faulty speed sensor or tachometer, a faulty door lock, or a fault in the control board motor drive circuit or triac. | High |
| F7 | Haier | Means the motor is not communicating correctly with the main board, often halting the spin cycle or preventing the drum from rotating. It is usually caused by a motor circuit failure, a motor driver failure, or a connection issue between the motor and the control board. | High |
| FC0 | Haier | Means a communication failure between the main control board and the motor controller or inverter PCB. It is usually caused by a faulty motor, a wiring issue, or board failure. | High |
| E7 | Hoover | Means the machine cannot lock the door to begin a cycle or it detects a faulty motor. It is usually caused by a failed door interlock, a jammed motor, or wiring issues. | Medium |
| E9 | Hoover | Means a motor triac failure on the control board where the machine cannot drive the motor. It is usually caused by a faulty triac, with some models showing this code for a blocked drain filter or a heating element fault. | High |
E6High
Candy
Means a motor failure, a faulty door lock, or a motor circuit fault, where the motor is not turning. It is usually caused by a faulty speed sensor or tachometer, a faulty door lock, or a fault in the control board motor drive circuit or triac.
F7High
Haier
Means the motor is not communicating correctly with the main board, often halting the spin cycle or preventing the drum from rotating. It is usually caused by a motor circuit failure, a motor driver failure, or a connection issue between the motor and the control board.
FC0High
Haier
Means a communication failure between the main control board and the motor controller or inverter PCB. It is usually caused by a faulty motor, a wiring issue, or board failure.
E7Medium
Hoover
Means the machine cannot lock the door to begin a cycle or it detects a faulty motor. It is usually caused by a failed door interlock, a jammed motor, or wiring issues.
E9High
Hoover
Means a motor triac failure on the control board where the machine cannot drive the motor. It is usually caused by a faulty triac, with some models showing this code for a blocked drain filter or a heating element fault.
Don’t see your code? Different model years sometimes use different codes. Get in touch with our parts team and we’ll help you identify the right replacement.
05
Fitting Guidance
MediumGeneral fitting guidance. The exact steps can vary slightly with the make and model of your washing machine.
Safety: Switch off and unplug at the mains before you start.
You’ll needScrewdriverSpanner or socket set
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
06
Specifications
- Part Number
- 41049777
- EAN / Barcode
- 8057166767447
- Genuine Spare Part
- Yes
07
Customer Reviews (1)
5.01 review
5
1
4
0
3
0
2
0
1
0
Motor
Excellent product Easy to fit and qoeks perfect Will buy again if required
David · Fulwood ·
Quality
Value
Ease of Fitting