Hoover
Hoover Washing Machine Motor Tacho Coil49011363
Suitable for Hoover, Candy, Hoover-Helkama, Jinling, Ostein
Stock Code: 154795
·
£31.50inc. VAT
£26.25 ex. VAT
In Stock
Next Day Delivery Available
Moderate DIY repair
A confident home repairer can do this with basic tools.
01
Compatibility Check
02
What this part does
Measures the motor speed so the control board can hold the right spin speed.
03
Will this fix my appliance?
Tick the symptoms your appliance is showing. We’ll tell you how confident we are this part is the fix.
04
Error codes related to this part
Error codes are model dependent, so the same brand may have more than one listed.
| Code | Brand | What it means | Confidence |
|---|---|---|---|
| E17 | Candy | Means a motor tachometer signal fault, where the motor is not turning or spinning properly. It is usually caused by a faulty tachometric dynamo or speed sensor, worn motor carbon brushes, or wiring issues. | Medium |
| E6 | Candy | Means a motor failure, a faulty door lock, or a motor circuit fault, where the motor is not turning. It is usually caused by a faulty speed sensor or tachometer, a faulty door lock, or a fault in the control board motor drive circuit or triac. | Medium |
| E17 | Hoover | Means a motor tachometer fault where the machine cannot accurately monitor motor speed, often leaving the drum failing to spin or spinning too fast. It is usually caused by a tachometer fault or an electrical issue with the motor wiring or control board. | High |
| E7 | Hoover | Means the machine cannot lock the door to begin a cycle or it detects a faulty motor. It is usually caused by a failed door interlock, a jammed motor, or wiring issues. | Medium |
| E8 | Hoover | Means a serious motor or drive system failure that prevents spinning and stops the machine mid-cycle. It is usually caused by worn carbon brushes, a faulty motor tachometer, or a damaged motor control board. | Medium |
| E9 | Hoover | Means a motor triac failure on the control board where the machine cannot drive the motor. It is usually caused by a faulty triac, with some models showing this code for a blocked drain filter or a heating element fault. | Medium |
| EO8 | Hoover | Means a motor circuit malfunction where the washer may not spin, spin too fast, or stop mid-cycle. It is usually caused by worn carbon brushes, a faulty tachometer speed sensor, or a motor control board issue, with overloading contributing. | Medium |
E17Medium
Candy
Means a motor tachometer signal fault, where the motor is not turning or spinning properly. It is usually caused by a faulty tachometric dynamo or speed sensor, worn motor carbon brushes, or wiring issues.
E6Medium
Candy
Means a motor failure, a faulty door lock, or a motor circuit fault, where the motor is not turning. It is usually caused by a faulty speed sensor or tachometer, a faulty door lock, or a fault in the control board motor drive circuit or triac.
E17High
Hoover
Means a motor tachometer fault where the machine cannot accurately monitor motor speed, often leaving the drum failing to spin or spinning too fast. It is usually caused by a tachometer fault or an electrical issue with the motor wiring or control board.
E7Medium
Hoover
Means the machine cannot lock the door to begin a cycle or it detects a faulty motor. It is usually caused by a failed door interlock, a jammed motor, or wiring issues.
E8Medium
Hoover
Means a serious motor or drive system failure that prevents spinning and stops the machine mid-cycle. It is usually caused by worn carbon brushes, a faulty motor tachometer, or a damaged motor control board.
E9Medium
Hoover
Means a motor triac failure on the control board where the machine cannot drive the motor. It is usually caused by a faulty triac, with some models showing this code for a blocked drain filter or a heating element fault.
EO8Medium
Hoover
Means a motor circuit malfunction where the washer may not spin, spin too fast, or stop mid-cycle. It is usually caused by worn carbon brushes, a faulty tachometer speed sensor, or a motor control board issue, with overloading contributing.
Don’t see your code? Different model years sometimes use different codes. Get in touch with our parts team and we’ll help you identify the right replacement.
05
Fitting Guidance
MediumGeneral fitting guidance. The exact steps can vary slightly with the make and model of your washing machine.
Safety: Switch off and unplug at the mains before you start.
You’ll needScrewdriver
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
06
Specifications
- Part Number
- 49011363
- EAN / Barcode
- 8032767478008
- Genuine Spare Part
- Yes
07
Customer Reviews (1)
5.01 review
5
1
4
0
3
0
2
0
1
0
Great product
Great product. very easy to use website. lots of help if needed. item was easy to fit. Great company, great products and great prices
David Cartlidge · Scarborough ·
Quality
Value
Ease of Fitting
08
Questions & Answers (2)
will this fit Candy model GVS148DC3/180 with a C.E.SET 50/60Hz CL.155(F) motor with the following numbers on it 41040979 410483350 MRC 52/64-148/CY82
Robert · Llanfairfechan ·
Hi Robert, the tacho coil required for your motor is RS124721.
JordanStaff·
What are the dimensions, as I have just received one for an electrolux machine and it is much too small. The one I need is 40mm inner dia x 25mm outer dia x 12mm depth for an MCA 30/64 motor.
terry · Wales ·
Hi Terry, MCA 30/64 is showing as a CESET motor. The tacho coil required for this is RS124721.
JordanStaff·