Hoover Washing Machine Electronic Control Board Programmed49039493

Name: Hoover Washing Machine Electronic Control Board Programmed
Brand: Hoover
SKU: 49039493
Price: 68.10 GBP
Availability: InStock

Suitable for Hoover

Stock Code: 904078

£68.10inc. VAT

£56.75 ex. VAT

In Stock

Next Day Delivery Available

Moderate DIY repair

A confident home repairer can do this with basic tools.

Compatibility Check

Brand

Model Number

What this part does

Drives the display and reads the programme selector and buttons.

Will this fix my appliance?

Tick the symptoms your appliance is showing. We’ll tell you how confident we are this part is the fix.

Error codes related to this part

Error codes are model dependent, so the same brand may have more than one listed.

Code	Brand	What it means	Confidence
E0	Hoover	Means a serious fault with the main electronic control board, often from a power surge, water damage, or a communication failure between the board and the motor. It is usually caused by a failed control board or, on some models, a faulty door lock.	Medium
E13	Hoover	Means a major fault with the PCB control board, often a communication failure or a faulty sensor. It is usually caused by a control board fault or a sensor fault, at times linked to heating or dryer issues on washer-dryers.	Medium
E15	Hoover	Means a control board failure or corrupted memory chip, or a water leak in the base tray triggering the anti-flood sensor. It is usually caused by a faulty control board or a leak reaching the flood sensor.	Medium
E18	Hoover	Means a control board fault where the main module cannot read the sensor data properly. It is usually caused by a power surge, water damage, or a component failure communicating with the main module.	Medium

E0Medium

Hoover

Means a serious fault with the main electronic control board, often from a power surge, water damage, or a communication failure between the board and the motor. It is usually caused by a failed control board or, on some models, a faulty door lock.

E13Medium

Hoover

Means a major fault with the PCB control board, often a communication failure or a faulty sensor. It is usually caused by a control board fault or a sensor fault, at times linked to heating or dryer issues on washer-dryers.

E15Medium

Hoover

Means a control board failure or corrupted memory chip, or a water leak in the base tray triggering the anti-flood sensor. It is usually caused by a faulty control board or a leak reaching the flood sensor.

E18Medium

Hoover

Means a control board fault where the main module cannot read the sensor data properly. It is usually caused by a power surge, water damage, or a component failure communicating with the main module.

Don’t see your code? Different model years sometimes use different codes. Get in touch with our parts team and we’ll help you identify the right replacement.

Fitting Guidance

Medium

General fitting guidance. The exact steps can vary slightly with the make and model of your washing machine.

Safety: Switch off and unplug at the mains before you start.

You’ll needScrewdriver

Specifications

Part Number: 49039493
EAN / Barcode: 8032768248532
Genuine Spare Part: Yes