Hoover
Hoover Washing Machine Drum Shock Absorber, Pack of 209200657
Suitable for Hoover, Candy, Otsein-Hoover
Stock Code: 123863
·
£11.50inc. VAT
£9.58 ex. VAT
In Stock
Next Day Delivery Available
Moderate DIY repair
A confident home repairer can do this with basic tools.
01
Compatibility Check
02
What this part does
Steadies the drum and reduces vibration during the spin.
03
Will this fix my appliance?
Tick the symptoms your appliance is showing. We’ll tell you how confident we are this part is the fix.
04
Error codes related to this part
Error codes are model dependent, so the same brand may have more than one listed.
| Code | Brand | What it means | Confidence |
|---|---|---|---|
| E6 | Hoover | Means an unbalanced load preventing the drum from spinning properly, or a motor or speed sensor fault. It is usually caused by an unbalanced load, with worn motor brushes contributing. | Medium |
E6Medium
Hoover
Means an unbalanced load preventing the drum from spinning properly, or a motor or speed sensor fault. It is usually caused by an unbalanced load, with worn motor brushes contributing.
Don’t see your code? Different model years sometimes use different codes. Get in touch with our parts team and we’ll help you identify the right replacement.
05
Fitting Guidance
MediumGeneral fitting guidance. The exact steps can vary slightly with the make and model of your washing machine.
Safety: Switch off and unplug at the mains before you start.
You’ll needScrewdriverPliersSocket set
- 1
- 2
- 3
- 4
- 5
- 6
- 7
06
Specifications
- Part Number
- 09200657
- EAN / Barcode
- 8032767384545
- Genuine Spare Part
- Yes
07
More Details
Genuine drum shock absorbers for your washing machine. Comes in 2 pieces.
When your washing machine spins at full speed, it creates a lot of movement. It helps reduce vibrations, stops the drum from bouncing around, and keeps your washer nice and stable through every cycle.
If your machine’s getting noisier, rattling, or shaking more than usual, it might be time for a new shock absorber. Swap it out with this part.
These washing machine drum shock absorbers are from Hoover. Also fits Candy and Otsein-Hoover washing machines.
Before ordering, please verify that this fits your model using our compatibility checker.
08
Customer Reviews (1)
5.01 review
5
1
4
0
3
0
2
0
1
0
Great Product , devil to fil!
This product is top quality. Unfortunately, the old pins in the Washing Machine were absolute pains to remove!. Got one out and found the shaft washers had completely failed - new part in, simply and easily - with new supplied pin. Second old pin would not budge at all. Realised the replacement parts are of such great quality and fit, that I could remove the old failed lower part by removing 4 screws and replace the missing shaft seals from the new part to the old, replace the new lower shaft and voila! No more banging, drum runs smoothly. Look, spend £20, repair the still fully functional machine and save £2 - £300 - no brainer. Ransome Spares delivered quickly and a top quality part. Many thanks
Andy H · Cornwall ·
Quality
Value
Ease of Fitting
09
Questions & Answers (3)
Hi will these shock absorbers RS123863 fit the Hoover HLW 585DC/1-80?
Chris · Great Yarmouth ·
Hi Chris, the shock absorber for your model is RS126122.
JordanStaff·
Hi will these fit my hoover HBWM 916 TAHC-80 9kg drum seems to be rocking around quite a lot.
Lee · Nottingham ·
Hi Lee, the damper required for your model is RS126122. These are sold individually.
JordanStaff·
Will this suitable for Hoover WMH148DF-80 Kevin
Kevin · London ·
Hi Kevin, the part required for your model is RS126122. These are sold individually.
JordanStaff·