Haier
Haier Washing Machine Water Heater Element 1800w49049479
Suitable for Haier, Hoover
Stock Code: 902128
£39.70inc. VAT
£33.08 ex. VAT
Usually despatched within 5 working days
Moderate DIY repair
A confident home repairer can do this with basic tools.
01
Compatibility Check
02
What this part does
Heats the wash water to the selected programme temperature.
03
Will this fix my appliance?
Tick the symptoms your appliance is showing. We’ll tell you how confident we are this part is the fix.
04
Error codes related to this part
Error codes are model dependent, so the same brand may have more than one listed.
| Code | Brand | What it means | Confidence |
|---|---|---|---|
| F4 | Haier | Means a heating failure, where the water is not reaching the required temperature, often towards the end of a cycle. It is usually caused by a faulty heating element, a damaged temperature sensor or thermistor, or loose wiring harness connections. | High |
| E12 | Hoover | Means a communication failure between the control board and the dryer heater sensor on washer-dryers, or a heating circuit fault during the drying cycle. It is usually caused by a sensor fault, wiring damage, or a control board fault when the machine fails to dry clothes. | High |
| E14 | Hoover | Means the water is not reaching the required temperature within a specific time. It is usually caused by a faulty heater element, a defective NTC sensor, or wiring issues, less commonly a control board fault. | High |
| E16 | Hoover | Means a serious fault with the water heating system that often trips the fuse box and stops the cycle. It is usually caused by a failed heating element or faulty insulation. | Medium |
| E19 | Hoover | Means a serious heating system or main control board fault, often where the heater has taken too long to heat the water. It is usually caused by a faulty heating element, poor wiring, or a defective module. | High |
F4High
Haier
Means a heating failure, where the water is not reaching the required temperature, often towards the end of a cycle. It is usually caused by a faulty heating element, a damaged temperature sensor or thermistor, or loose wiring harness connections.
E12High
Hoover
Means a communication failure between the control board and the dryer heater sensor on washer-dryers, or a heating circuit fault during the drying cycle. It is usually caused by a sensor fault, wiring damage, or a control board fault when the machine fails to dry clothes.
E14High
Hoover
Means the water is not reaching the required temperature within a specific time. It is usually caused by a faulty heater element, a defective NTC sensor, or wiring issues, less commonly a control board fault.
E16Medium
Hoover
Means a serious fault with the water heating system that often trips the fuse box and stops the cycle. It is usually caused by a failed heating element or faulty insulation.
E19High
Hoover
Means a serious heating system or main control board fault, often where the heater has taken too long to heat the water. It is usually caused by a faulty heating element, poor wiring, or a defective module.
Don’t see your code? Different model years sometimes use different codes. Get in touch with our parts team and we’ll help you identify the right replacement.
05
Fitting Guidance
MediumGeneral fitting guidance. The exact steps can vary slightly with the make and model of your washing machine.
Safety: Switch off and unplug at the mains and let it cool before you start.
You’ll needScrewdriverNut driver or socket
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
06
Specifications
- Part Number
- 49049479
- EAN / Barcode
- 8057166038158
- Genuine Spare Part
- Yes
07
More Details
Genuine 1800W water heater element for your washing machine. It’s made with stainless steel that generates heat when electricity flows through it.
Your washing machine's heater element warms up the water during the wash cycle. Just enough heat to get your clothes sparkling clean after they’ve been washed. Hot water also helps dissolve detergent and remove stains more effectively so your clothes are cleaner.
Also works together with the washing machine's control system to regulate water temperature for different wash programs.
This water heater element for your washing machine is from Haier. Also fits Hoover washing machines.
Before ordering, please verify that this part is suitable for your model using our compatibility checker.