Electrolux
Electrolux Washing Machine Heater Element 1750w 1327372312919353
Suitable for Electrolux, AEG, Arthur Martin, Elektro Helios, Faure
Stock Code: 919353
£9.95inc. VAT
£8.29 ex. VAT
In Stock
Next Day Delivery Available
Moderate DIY repair
A confident home repairer can do this with basic tools.
01
Compatibility Check
02
What this part does
Heats the wash water to the selected programme temperature.
03
Will this fix my appliance?
Tick the symptoms your appliance is showing. We’ll tell you how confident we are this part is the fix.
04
Error codes related to this part
Error codes are model dependent, so the same brand may have more than one listed.
| Code | Brand | What it means | Confidence |
|---|---|---|---|
| E6 | AEG | Means a heating system failure, where the machine cannot heat the water to the required temperature. It is usually caused by a fault in the heating circuit, control board, or temperature sensor. | High |
| E60 | AEG | Means a heating problem, where the machine cannot reach the required temperature during a wash. It is usually caused by a failed heating element, faulty wiring, or a malfunctioning NTC temperature sensor. | High |
| E69 | AEG | Means a heating element failure, where the element is broken or faulty and failing to heat the water. It is usually caused by a short circuit or open circuit in the element itself, or a wiring fault. | High |
| E60 | Electrolux | Means the water is not reaching the correct temperature during the wash cycle. It is usually caused by a faulty heating element, a faulty temperature sensor, or poor wiring connections. | High |
| E61 | Electrolux | Means the water is not heating properly or the heating cycle time has been exceeded. It is usually caused by a faulty heating element, a broken NTC sensor (thermistor), loose wiring, or a malfunctioning control board. | High |
| EH2 | Electrolux | Means the input voltage is too high, or there is a motor control issue caused by that high voltage. It is usually caused by electrical issues, faulty wiring, or a malfunctioning PCB. | High |
| E60 | Zanussi | Means a heating fault, with the machine failing to heat water or stopping mid-cycle, while on certain models it means a motor or drive circuit fault. It is usually caused by a faulty heating element, an NTC sensor, or wiring issues. | High |
| E61 | Zanussi | Means the water is not heating up to the required temperature. It is usually caused by a faulty heating element, faulty wiring, or an NTC sensor issue. | High |
| E62 | Zanussi | Means the water has overheated above 90 degrees Celsius, signalling a fault in the heating system. It is usually caused by a faulty temperature sensor, a defective heating element, or a malfunctioning control board. | High |
| E66 | Zanussi | Means a heating element power relay fault, with the machine unable to heat water and leaving cold, soapy clothes at the end of the cycle. It is usually caused by a failed heater or a stuck main control board relay. | High |
| ED1 | Zanussi | Means a dryer control board fault or a failure in the drying circuit, encountered on washer dryer models such as the ZWD14270W1. It is usually caused by the dryer component failing to activate or a sensor detecting that the drying cycle is not progressing correctly. | High |
E6High
AEG
Means a heating system failure, where the machine cannot heat the water to the required temperature. It is usually caused by a fault in the heating circuit, control board, or temperature sensor.
E60High
AEG
Means a heating problem, where the machine cannot reach the required temperature during a wash. It is usually caused by a failed heating element, faulty wiring, or a malfunctioning NTC temperature sensor.
E69High
AEG
Means a heating element failure, where the element is broken or faulty and failing to heat the water. It is usually caused by a short circuit or open circuit in the element itself, or a wiring fault.
E60High
Electrolux
Means the water is not reaching the correct temperature during the wash cycle. It is usually caused by a faulty heating element, a faulty temperature sensor, or poor wiring connections.
E61High
Electrolux
Means the water is not heating properly or the heating cycle time has been exceeded. It is usually caused by a faulty heating element, a broken NTC sensor (thermistor), loose wiring, or a malfunctioning control board.
EH2High
Electrolux
Means the input voltage is too high, or there is a motor control issue caused by that high voltage. It is usually caused by electrical issues, faulty wiring, or a malfunctioning PCB.
E60High
Zanussi
Means a heating fault, with the machine failing to heat water or stopping mid-cycle, while on certain models it means a motor or drive circuit fault. It is usually caused by a faulty heating element, an NTC sensor, or wiring issues.
E61High
Zanussi
Means the water is not heating up to the required temperature. It is usually caused by a faulty heating element, faulty wiring, or an NTC sensor issue.
E62High
Zanussi
Means the water has overheated above 90 degrees Celsius, signalling a fault in the heating system. It is usually caused by a faulty temperature sensor, a defective heating element, or a malfunctioning control board.
E66High
Zanussi
Means a heating element power relay fault, with the machine unable to heat water and leaving cold, soapy clothes at the end of the cycle. It is usually caused by a failed heater or a stuck main control board relay.
ED1High
Zanussi
Means a dryer control board fault or a failure in the drying circuit, encountered on washer dryer models such as the ZWD14270W1. It is usually caused by the dryer component failing to activate or a sensor detecting that the drying cycle is not progressing correctly.
Don’t see your code? Different model years sometimes use different codes. Get in touch with our parts team and we’ll help you identify the right replacement.
05
Fitting Guidance
MediumGeneral fitting guidance. The exact steps can vary slightly with the make and model of your washing machine.
Safety: Switch off and unplug at the mains and let it cool before you start.
You’ll needScrewdriverNut driver or socket
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
06
Specifications
- Part Number
- 919353
- Genuine Spare Part
- No
07
More Details
Genuine water heating element for your washing machine powered at 1750W. It’s made with stainless steel that generates heat when electricity flows through it.
The heater element warms up the water used for your clothes during the wash cycle. Just the right temperature to get your clothes sparkling clean after they’ve been washed. If you're using hot water, it helps dissolve detergent and remove stains more effectively.
So if the washing machine isn’t heating water properly or if cycles are taking longer than usual, you need to replace your heater element.
This water heating element is from Electrolux. You can also check with the other suitable brands from the list above.
Before ordering, please verify that this part is suitable for your model using our compatibility checker.
08
Customer Reviews (2)
4.52 reviews
5
1
4
1
3
0
2
0
1
0
Great replacement
Bought this heating element to replace original. The item was in stock, delivered next day. It was easy to fit, and appears to be the same quality and works as good as the original.
Graham Harrison · Watford ·
Quality
Value
Ease of Fitting
Esay to fit, exactly the same as the original
I chose the cheaper option heater element for my washing machine and as described it was exactly the same as the original item that costs 4 x from the manufacturer OEM. Same model no, same manufacturer etc etc. Very happy, just installed and working fine. Thanks
N Clark · London ·
Quality
Value
Ease of Fitting