Candy
Candy Washing Machine Solenoid Fill Inlet Valve41018989
Suitable for Candy, Arda, Baumatic, Berloni, Brandt
Stock Code: 125784
£11.05inc. VAT
£9.21 ex. VAT
In Stock
Next Day Delivery Available
Moderate DIY repair
A confident home repairer can do this with basic tools.
01
Compatibility Check
02
What this part does
Controls the water flowing into the machine.
03
Will this fix my appliance?
Tick the symptoms your appliance is showing. We’ll tell you how confident we are this part is the fix.
04
Error codes related to this part
Error codes are model dependent, so the same brand may have more than one listed.
| Code | Brand | What it means | Confidence |
|---|---|---|---|
| E2 | Candy | Means a water fill failure, where the machine cannot take in water within a set time. It is usually caused by a closed tap, a kinked hose, a blocked inlet filter, or a faulty water inlet valve. | High |
| E4 | Candy | Means an overfill fault, where the machine has detected too much water or foam in the drum. It is usually caused by a faulty pressure switch, a water inlet valve stuck open, or excess detergent. | High |
| E4 | Haier | Means the machine has not reached the required water level within a set time, from not filling, filling too slowly, or draining at the same time. It is usually caused by low water pressure, blocked filters, or a kinked inlet hose. | High |
| E10 | Hoover | Means the machine fails to take in water, takes in too little, or takes too long to fill. It is usually caused by a faulty drum or water pressure sensor, a blockage, a jammed filter, or a communication error between the control board and the motor controller. | High |
| E15 | Hoover | Means a control board failure or corrupted memory chip, or a water leak in the base tray triggering the anti-flood sensor. It is usually caused by a faulty control board or a leak reaching the flood sensor. | Medium |
| E2 | Hoover | Means the machine cannot take in water within a set time. It is usually caused by a low water supply, a kinked hose, a blocked inlet filter, or a dislodged pressure switch tube. | High |
| E4 | Hoover | Means an overfill where the machine senses too much water. It is usually caused by too much detergent creating excessive suds, a faulty pressure switch, or a blocked drain filter. | High |
E2High
Candy
Means a water fill failure, where the machine cannot take in water within a set time. It is usually caused by a closed tap, a kinked hose, a blocked inlet filter, or a faulty water inlet valve.
E4High
Candy
Means an overfill fault, where the machine has detected too much water or foam in the drum. It is usually caused by a faulty pressure switch, a water inlet valve stuck open, or excess detergent.
E4High
Haier
Means the machine has not reached the required water level within a set time, from not filling, filling too slowly, or draining at the same time. It is usually caused by low water pressure, blocked filters, or a kinked inlet hose.
E10High
Hoover
Means the machine fails to take in water, takes in too little, or takes too long to fill. It is usually caused by a faulty drum or water pressure sensor, a blockage, a jammed filter, or a communication error between the control board and the motor controller.
E15Medium
Hoover
Means a control board failure or corrupted memory chip, or a water leak in the base tray triggering the anti-flood sensor. It is usually caused by a faulty control board or a leak reaching the flood sensor.
E2High
Hoover
Means the machine cannot take in water within a set time. It is usually caused by a low water supply, a kinked hose, a blocked inlet filter, or a dislodged pressure switch tube.
E4High
Hoover
Means an overfill where the machine senses too much water. It is usually caused by too much detergent creating excessive suds, a faulty pressure switch, or a blocked drain filter.
Don’t see your code? Different model years sometimes use different codes. Get in touch with our parts team and we’ll help you identify the right replacement.
05
Fitting Guidance
MediumGeneral fitting guidance. The exact steps can vary slightly with the make and model of your washing machine.
Safety: Switch off at the mains and turn off the water supply before you start.
You’ll needScrewdriverPliersTowel
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
06
Specifications
- Part Number
- 41018989
- EAN / Barcode
- 8032767404427
- Genuine Spare Part
- Yes
07
More Details
What is a solenoid fill inlet valve?
A solenoid fill inlet valve controls the flow of water into the machine during the fill cycle. It is an electromechanical valve that opens and closes based on signals from the washing machine's control board.
It also allows water to enter the washer when needed and shutting off the water supply when the appropriate water level is reached.
How do you know if your washing machine’s solenoid fill inlet valve is broken?
The most common signs include the washing machine not filling with water at all, not filling with the correct amount of water, or water continuously flowing into the machine even when it is not in use.
You may observe water leakage around the valve area or hear a constant humming sound from the valve when it is malfunctioning.
Would this fit in my washing machine?
This solenoid fill water inlet valve is a genuine Indesit washing machine spare part. It also fits Ariston, Hotpoint, Scholtes, and Whirlpool washing machines. Use our compatibility checker to see if this part fits your model.
08
Customer Reviews (7)
5.07 reviews
5
7
4
0
3
0
2
0
1
0
Sort by:||
CANDY WASHING MACHINE SOLENOID FILL INLET VALVE
Bought this part from Ransom Spares in the UK as I could not find it in Ireland. Thankfully they ship to ROI. Item was sent quickly from company but held up by Royal post in the UK (thanks brexit). When it finally arrived I was able to replace my water inlet valve quickly and the issue of water filling up in my washing machine is now solved. Fitted and works perfectly with my Candy washing machine. Thanks.
Stephen Mullins · Kilkenny ·
Quality
Value
Ease of Fitting
Product Fits Perfectly
Product arrived 1 day later than suggested on the order site. Exact product specification, and fitted easily. Cured my problem.
Ian · Bathgate ·
Quality
Value
Ease of Fitting
Easy to install, does the job!
I was a bit unsure at first as I self diagnosed the problem with my washing machine, with no real knowledge of them. I bought this and watched a youtube video and everything was sorted in about 20 mins, very easy to install and does the job perfectly at a great price.
Jacob Huntley · Buckfastleigh ·
Quality
Value
Ease of Fitting
Great product
This was fairly easy to fit ,but that down how product made on the original was twist fitting and other have two screws fixing and nothing do with the high quality product that I purchased and highly recommend company for their speedy delivery and the customer care .this saved me money in long run and I'm living the dream !
Craig Curran · Stockport ·
Quality
Value
Ease of Fitting
Great value, identical part
Ordered to replace a frost damaged valve, prompt delivery, identical replacement, easily fitted in minutes.
Mr David Walters · Middlesbrough ·
Quality
Value
Ease of Fitting