Candy
Candy Washing Machine Pressure Switch41035075
Suitable for Candy, Arda, Baumatic, Concord, Crafft
Stock Code: 752572
·
£16.65inc. VAT
£13.88 ex. VAT
In Stock
Next Day Delivery Available
Moderate DIY repair
A confident home repairer can do this with basic tools.
01
Compatibility Check
02
What this part does
Senses the water level in the tub and tells the control board when to start and stop filling.
03
Will this fix my appliance?
Tick the symptoms your appliance is showing. We’ll tell you how confident we are this part is the fix.
04
Error codes related to this part
Error codes are model dependent, so the same brand may have more than one listed.
| Code | Brand | What it means | Confidence |
|---|---|---|---|
| E4 | Candy | Means an overfill fault, where the machine has detected too much water or foam in the drum. It is usually caused by a faulty pressure switch, a water inlet valve stuck open, or excess detergent. | High |
| E10 | Hoover | Means the machine fails to take in water, takes in too little, or takes too long to fill. It is usually caused by a faulty drum or water pressure sensor, a blockage, a jammed filter, or a communication error between the control board and the motor controller. | Medium |
| E15 | Hoover | Means a control board failure or corrupted memory chip, or a water leak in the base tray triggering the anti-flood sensor. It is usually caused by a faulty control board or a leak reaching the flood sensor. | Medium |
| E2 | Hoover | Means the machine cannot take in water within a set time. It is usually caused by a low water supply, a kinked hose, a blocked inlet filter, or a dislodged pressure switch tube. | Medium |
| E4 | Hoover | Means an overfill where the machine senses too much water. It is usually caused by too much detergent creating excessive suds, a faulty pressure switch, or a blocked drain filter. | High |
E4High
Candy
Means an overfill fault, where the machine has detected too much water or foam in the drum. It is usually caused by a faulty pressure switch, a water inlet valve stuck open, or excess detergent.
E10Medium
Hoover
Means the machine fails to take in water, takes in too little, or takes too long to fill. It is usually caused by a faulty drum or water pressure sensor, a blockage, a jammed filter, or a communication error between the control board and the motor controller.
E15Medium
Hoover
Means a control board failure or corrupted memory chip, or a water leak in the base tray triggering the anti-flood sensor. It is usually caused by a faulty control board or a leak reaching the flood sensor.
E2Medium
Hoover
Means the machine cannot take in water within a set time. It is usually caused by a low water supply, a kinked hose, a blocked inlet filter, or a dislodged pressure switch tube.
E4High
Hoover
Means an overfill where the machine senses too much water. It is usually caused by too much detergent creating excessive suds, a faulty pressure switch, or a blocked drain filter.
Don’t see your code? Different model years sometimes use different codes. Get in touch with our parts team and we’ll help you identify the right replacement.
05
Fitting Guidance
MediumGeneral fitting guidance. The exact steps can vary slightly with the make and model of your washing machine.
Safety: Switch off and unplug at the mains before you start.
You’ll needScrewdriver
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
06
Specifications
- Part Number
- 41035075
- EAN / Barcode
- 8032767743656
- Genuine Spare Part
- Yes
07
More Details
This is a genuine washing machine pressure switch.
Helps your washing machine know exactly how much water is in the drum. It keeps things balanced—making sure there’s not too much or too little—so your wash cycles run just right every time.
If your washer is overfilling, not filling at all, or stopping mid-cycle, the pressure switch might be acting up. Change it as needed with this part.
This pressure switch for your washing machine is from Candy. You can also check other suitable brands from the list above.
Please verify that this fits your model using our compatibility checker before ordering.
08
Customer Reviews (3)
5.03 reviews
5
3
4
0
3
0
2
0
1
0
Great item
Great item did the job and fast delivery and easy to use website will use for my parts again 👍😀
Tracey · Hull ·
Quality
Value
Ease of Fitting
Exact OEM item super
Actual OEM, Original Equipment Manufacturer, item. Price best I could find. Delivered quickly and no problem.
Robert Manix · Hertfordshire ·
Quality
Value
Ease of Fitting
Straight forward replacement
Made sure I had the correct Model number etc, identification of the replacement was fairly easy, as was the ordering. Delivery was as promised and fitting was straightforward. Result was, the washer back up and running. Price was best online.
Malcolm Edwards · Hinckley ·
Quality
Value
Ease of Fitting
09
Questions & Answers (1)
If this part is faulty will it effect the E03 code as the machine is completely clear of all blockages and it still stops showing the same code ? The drum is completely empty !
Jason Leyshon · Bridgend South Wales ·
Hi Jason, unfortunately we aren't able to offer technical advice. I'd recommend contacting the manufacturer's or an engineer to see if they can confirm. Please accept our apologies.
JordanStaff·