Candy
Candy Washing Machine NTC Temperature Probe41022107
Suitable for Candy, Baumatic, Berloni, Caple, De Dietrich
Stock Code: 126226
·
£12.40inc. VAT
£10.33 ex. VAT
In Stock
Next Day Delivery Available
Moderate DIY repair
A confident home repairer can do this with basic tools.
01
Compatibility Check
02
What this part does
Measures the water and drying temperature for the control board.
03
Will this fix my appliance?
Tick the symptoms your appliance is showing. We’ll tell you how confident we are this part is the fix.
04
Error codes related to this part
Error codes are model dependent, so the same brand may have more than one listed.
| Code | Brand | What it means | Confidence |
|---|---|---|---|
| E11 | Candy | Means a fault in the drying circuit, most common on washer-dryer models. It is usually caused by a faulty drying NTC sensor or thermistor, broken wiring, a heating element fault, or clogged air ducts. | High |
| E12 | Candy | Means a communication error between the main control board and the dryer heater, causing a heating failure during the drying cycle. It is usually caused by a faulty control board or a failed dryer heater. | High |
| E14 | Candy | Means a water heating circuit fault, and on washer-dryers a dryer heater fault. It is usually caused by a failed heater element, a faulty NTC sensor, a faulty connection, or a malfunctioning control board. | High |
| E5 | Candy | Means a heating failure where the water does not heat up, or a drainage fault that prevents the spin cycle. It is usually caused by a faulty NTC water temperature sensor, a failed drain pump, or a blocked filter. | High |
| E12 | Hoover | Means a communication failure between the control board and the dryer heater sensor on washer-dryers, or a heating circuit fault during the drying cycle. It is usually caused by a sensor fault, wiring damage, or a control board fault when the machine fails to dry clothes. | High |
| E14 | Hoover | Means the water is not reaching the required temperature within a specific time. It is usually caused by a faulty heater element, a defective NTC sensor, or wiring issues, less commonly a control board fault. | Medium |
| E19 | Hoover | Means a serious heating system or main control board fault, often where the heater has taken too long to heat the water. It is usually caused by a faulty heating element, poor wiring, or a defective module. | High |
E11High
Candy
Means a fault in the drying circuit, most common on washer-dryer models. It is usually caused by a faulty drying NTC sensor or thermistor, broken wiring, a heating element fault, or clogged air ducts.
E12High
Candy
Means a communication error between the main control board and the dryer heater, causing a heating failure during the drying cycle. It is usually caused by a faulty control board or a failed dryer heater.
E14High
Candy
Means a water heating circuit fault, and on washer-dryers a dryer heater fault. It is usually caused by a failed heater element, a faulty NTC sensor, a faulty connection, or a malfunctioning control board.
E5High
Candy
Means a heating failure where the water does not heat up, or a drainage fault that prevents the spin cycle. It is usually caused by a faulty NTC water temperature sensor, a failed drain pump, or a blocked filter.
E12High
Hoover
Means a communication failure between the control board and the dryer heater sensor on washer-dryers, or a heating circuit fault during the drying cycle. It is usually caused by a sensor fault, wiring damage, or a control board fault when the machine fails to dry clothes.
E14Medium
Hoover
Means the water is not reaching the required temperature within a specific time. It is usually caused by a faulty heater element, a defective NTC sensor, or wiring issues, less commonly a control board fault.
E19High
Hoover
Means a serious heating system or main control board fault, often where the heater has taken too long to heat the water. It is usually caused by a faulty heating element, poor wiring, or a defective module.
Don’t see your code? Different model years sometimes use different codes. Get in touch with our parts team and we’ll help you identify the right replacement.
05
Fitting Guidance
MediumGeneral fitting guidance. The exact steps can vary slightly with the make and model of your washing machine.
Safety: Switch off and unplug at the mains and let the machine cool before you start.
You’ll needScrewdriver
- 1
- 2
- 3
- 4
- 5
- 6
- 7
06
Specifications
- Part Number
- 41022107
- Alternative Part Numbers
- 41020334, 41022106
- EAN / Barcode
- 8032767442658
- Genuine Spare Part
- Yes
07
Customer Reviews (1)
5.01 review
5
1
4
0
3
0
2
0
1
0
Hoover Error 5 fix
Genuine Hoover spare supplied at a good price. Straight forward to fit. Washing Machine back to normal operations
Donald Clark · Harpenden ·
Quality
Value
Ease of Fitting
08
Questions & Answers (1)
Is the thermistor, the thermostat as I have change heating element and still have cold water, and not sure what fault Could be Thanks . Steve
Steve Hitchcock · Southampton ·
Hi Steve. This NTC probe is the thermostat for the heating element.
JackStaff·