Candy
Candy Washing Machine Display PCB Board41041466
Suitable for Candy, Baumatic, Brandt, Camec, Caple
Stock Code: 754356
·
£57.00inc. VAT
£47.50 ex. VAT
In Stock
Next Day Delivery Available
Moderate DIY repair
A confident home repairer can do this with basic tools.
01
Compatibility Check
02
What this part does
Drives the display and reads the programme selector and buttons.
03
Will this fix my appliance?
Tick the symptoms your appliance is showing. We’ll tell you how confident we are this part is the fix.
04
Error codes related to this part
Error codes are model dependent, so the same brand may have more than one listed.
| Code | Brand | What it means | Confidence |
|---|---|---|---|
| E15 | Candy | Means a critical control board failure, or a water leak that has triggered the flood sensor in the base. It is usually caused by corrupted board memory, failed programming, or a blocked drain system. | Medium |
| E9 | Candy | Means a motor triac failure on the control board that controls the motor speed and spin cycle. It is usually caused by a faulty control board not supplying proper power to the motor. | Medium |
| E0 | Hoover | Means a serious fault with the main electronic control board, often from a power surge, water damage, or a communication failure between the board and the motor. It is usually caused by a failed control board or, on some models, a faulty door lock. | Medium |
| E13 | Hoover | Means a major fault with the PCB control board, often a communication failure or a faulty sensor. It is usually caused by a control board fault or a sensor fault, at times linked to heating or dryer issues on washer-dryers. | Medium |
| E15 | Hoover | Means a control board failure or corrupted memory chip, or a water leak in the base tray triggering the anti-flood sensor. It is usually caused by a faulty control board or a leak reaching the flood sensor. | Medium |
| E18 | Hoover | Means a control board fault where the main module cannot read the sensor data properly. It is usually caused by a power surge, water damage, or a component failure communicating with the main module. | Medium |
E15Medium
Candy
Means a critical control board failure, or a water leak that has triggered the flood sensor in the base. It is usually caused by corrupted board memory, failed programming, or a blocked drain system.
E9Medium
Candy
Means a motor triac failure on the control board that controls the motor speed and spin cycle. It is usually caused by a faulty control board not supplying proper power to the motor.
E0Medium
Hoover
Means a serious fault with the main electronic control board, often from a power surge, water damage, or a communication failure between the board and the motor. It is usually caused by a failed control board or, on some models, a faulty door lock.
E13Medium
Hoover
Means a major fault with the PCB control board, often a communication failure or a faulty sensor. It is usually caused by a control board fault or a sensor fault, at times linked to heating or dryer issues on washer-dryers.
E15Medium
Hoover
Means a control board failure or corrupted memory chip, or a water leak in the base tray triggering the anti-flood sensor. It is usually caused by a faulty control board or a leak reaching the flood sensor.
E18Medium
Hoover
Means a control board fault where the main module cannot read the sensor data properly. It is usually caused by a power surge, water damage, or a component failure communicating with the main module.
Don’t see your code? Different model years sometimes use different codes. Get in touch with our parts team and we’ll help you identify the right replacement.
05
Fitting Guidance
MediumGeneral fitting guidance. The exact steps can vary slightly with the make and model of your washing machine.
Safety: Switch off and unplug at the mains before you start.
You’ll needScrewdriver
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
06
Specifications
- Part Number
- 41041466
- Alternative Part Numbers
- 41035005
- EAN / Barcode
- 8032767976900
- Genuine Spare Part
- Yes
07
Customer Reviews (4)
5.04 reviews
5
4
4
0
3
0
2
0
1
0
Easy to fit
The pcb board was correct and was very easy to fit The price was good and delivery was next day
Derek Massey · Broxbourne ·
Quality
Value
Ease of Fitting
Does work as intended
I bought it for my Hoover washing machine. It fits and works as required. Paid for next day delivery and it arrived in time... well supplied:))
Roman · Oxford ·
Quality
Value
Ease of Fitting
Easy to fit
Just as described and worked perfectly. No problems in fitting.
Mukesh Patel · London ·
Quality
Value
Ease of Fitting
good quality
This module was excellent value.Used this firm before and had good service.robert paul domestic appliance repairs.THAN YOU.
robert paul · cardiff ·
Quality
Value
Ease of Fitting
08
Questions & Answers (2)
Hi. my VT816D22 washer wont spin and is showing error E09. Is this the part I need to fix it?
John Paul · Stockport ·
Hi, I'm afraid we are unable to confirm the parts required from the error code. I'd recommend contacting the manufacturers to see if they can advise.
JordanStaff·
Is this a plug and play part? Or does it need to be programmed?
Andy · London ·
Hi Andy, this board will plug and play. It won't need to be programmed.
JordanStaff·