Bosch
Bosch Washing Machine Water Heating Element12046381
Suitable for Bosch, Balay, Constructa, Gaggenau, Koenic
Stock Code: 864995
£31.75inc. VAT
£26.46 ex. VAT
In Stock
Next Day Delivery Available
Moderate DIY repair
A confident home repairer can do this with basic tools.
01
Compatibility Check
02
What this part does
Heats the wash water to the selected programme temperature.
03
Will this fix my appliance?
Tick the symptoms your appliance is showing. We’ll tell you how confident we are this part is the fix.
04
Error codes related to this part
Error codes are model dependent, so the same brand may have more than one listed.
| Code | Brand | What it means | Confidence |
|---|---|---|---|
| E19 | Bosch | Means a heating failure, where the water is not heating up within the expected time. It is usually caused by a faulty heating element, a broken thermistor (temperature sensor), or a control board fault. | High |
| E9 | Bosch | Means a heating circuit fault where the water is not heating properly. It is usually caused by a failed heating element, an NTC sensor problem, wiring corrosion, or communication issues between the control modules. | High |
| F2 | Bosch | Means a heating fault where the water is not reaching the required temperature within a set time, or in specific models a drainage problem. It is usually caused by a faulty heating element (heater). | High |
| H19 | Bosch | Means a heating failure, specifically that the water heating time has been exceeded and the machine is not reaching the desired temperature within a set timeframe. It is usually caused by a water inlet fault or a blockage. | High |
E19High
Bosch
Means a heating failure, where the water is not heating up within the expected time. It is usually caused by a faulty heating element, a broken thermistor (temperature sensor), or a control board fault.
E9High
Bosch
Means a heating circuit fault where the water is not heating properly. It is usually caused by a failed heating element, an NTC sensor problem, wiring corrosion, or communication issues between the control modules.
F2High
Bosch
Means a heating fault where the water is not reaching the required temperature within a set time, or in specific models a drainage problem. It is usually caused by a faulty heating element (heater).
H19High
Bosch
Means a heating failure, specifically that the water heating time has been exceeded and the machine is not reaching the desired temperature within a set timeframe. It is usually caused by a water inlet fault or a blockage.
Don’t see your code? Different model years sometimes use different codes. Get in touch with our parts team and we’ll help you identify the right replacement.
05
Fitting Guidance
MediumGeneral fitting guidance. The exact steps can vary slightly with the make and model of your washing machine.
Safety: Switch off and unplug at the mains and let it cool before you start.
You’ll needScrewdriverNut driver or socket
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
06
Specifications
- Part Number
- 12046381
- Alternative Part Numbers
- 00659861, 12013215, 12024621, 12024933
- Genuine Spare Part
- Yes
07
More Details
Genuine replacement water heating element for your washing machine.
It warms up the water during the wash cycle. Just enough heat to get your clothes sparkling clean. Also works together with the washing machine's control system to regulate water temperature for different wash programs.
If it’s damaged, you’ll notice that the water is not heating, longer wash cycles, error codes, and the machine stops mid-cycle. Change it promptly with this replacement part.
This heating element for your washing machine is from Bosch. Also fits Balay, Constructa, Gaggenau, Koenic, Neff, Pitsos, Profilo, Siemens, and Viva washing machines.
Before ordering, please verify that this part is suitable for your model using our compatibility checker.
08
Customer Reviews (2)
5.02 reviews
5
2
4
0
3
0
2
0
1
0
Worked
Washing machine wasn't heating the water so replaced the element and thermostat. First time I realised that I hadn't seated it properly and drum was grinding against the element. Easily adjusted and machine works as good as new.
Andrew Gray · Aylesbury ·
Quality
Value
Ease of Fitting
Excellent oroduct
Ease of use and helpful advise from kind staff Would highly recommend
Abdus shahid · London ·
Quality
Value
Ease of Fitting