Bosch
Bosch Washing Machine Thermostat61875
Suitable for Bosch, Balay, Constructa, De Dietrich, Gaggenau
Stock Code: 1008332
£8.95inc. VAT
£7.46 ex. VAT
In Stock
Next Day Delivery Available
Moderate DIY repair
A confident home repairer can do this with basic tools.
01
Compatibility Check
02
What this part does
Measures the water and drying temperature for the control board.
03
Will this fix my appliance?
Tick the symptoms your appliance is showing. We’ll tell you how confident we are this part is the fix.
04
Error codes related to this part
Error codes are model dependent, so the same brand may have more than one listed.
| Code | Brand | What it means | Confidence |
|---|---|---|---|
| E19 | Bosch | Means a heating failure, where the water is not heating up within the expected time. It is usually caused by a faulty heating element, a broken thermistor (temperature sensor), or a control board fault. | Medium |
| E9 | Bosch | Means a heating circuit fault where the water is not heating properly. It is usually caused by a failed heating element, an NTC sensor problem, wiring corrosion, or communication issues between the control modules. | High |
| F2 | Bosch | Means a heating fault where the water is not reaching the required temperature within a set time, or in specific models a drainage problem. It is usually caused by a faulty heating element (heater). | High |
| H19 | Bosch | Means a heating failure, specifically that the water heating time has been exceeded and the machine is not reaching the desired temperature within a set timeframe. It is usually caused by a water inlet fault or a blockage. | High |
E19Medium
Bosch
Means a heating failure, where the water is not heating up within the expected time. It is usually caused by a faulty heating element, a broken thermistor (temperature sensor), or a control board fault.
E9High
Bosch
Means a heating circuit fault where the water is not heating properly. It is usually caused by a failed heating element, an NTC sensor problem, wiring corrosion, or communication issues between the control modules.
F2High
Bosch
Means a heating fault where the water is not reaching the required temperature within a set time, or in specific models a drainage problem. It is usually caused by a faulty heating element (heater).
H19High
Bosch
Means a heating failure, specifically that the water heating time has been exceeded and the machine is not reaching the desired temperature within a set timeframe. It is usually caused by a water inlet fault or a blockage.
Don’t see your code? Different model years sometimes use different codes. Get in touch with our parts team and we’ll help you identify the right replacement.
05
Fitting Guidance
MediumGeneral fitting guidance. The exact steps can vary slightly with the make and model of your washing machine.
Safety: Switch off and unplug at the mains and let the machine cool before you start.
You’ll needScrewdriver
- 1
- 2
- 3
- 4
- 5
- 6
- 7
06
Specifications
- Part Number
- 61875
- Alternative Part Numbers
- 00154431, 00170961, 00175369
- Genuine Spare Part
- No
07
More Details
This is a high-quality thermostat for your washing machine.
Keeps your wash cycles just right by monitoring the water temperature inside the drum. This sensor helps your machine heat water accurately for optimal cleaning and fabric care.
If your clothes aren’t coming out as clean as they used to—or if the machine isn’t heating properly—the sensor might be the issue. Replace it with this part to keep your washer running smoothly and efficiently.
This washing machine thermostat fits Balay, Bosch, Constructa, De Dietrich, Gaggenau, Koenic, Kuppersbusch, Lynx, Neff, Pitsos, Profilo, Siemens, Tecnik, and Viva models.
Before ordering, please verify that this set is suitable for your model using our compatibility checker.