Bosch
Bosch Washing Machine Heating Element12024715
Suitable for Bosch, Balay, Constructa, Koenic, Lynx
Stock Code: 865004
£26.90inc. VAT
£22.42 ex. VAT
In Stock
Next Day Delivery Available
Moderate DIY repair
A confident home repairer can do this with basic tools.
01
Compatibility Check
02
What this part does
Heats the wash water to the selected programme temperature.
03
Will this fix my appliance?
Tick the symptoms your appliance is showing. We’ll tell you how confident we are this part is the fix.
04
Error codes related to this part
Error codes are model dependent, so the same brand may have more than one listed.
| Code | Brand | What it means | Confidence |
|---|---|---|---|
| E19 | Bosch | Means a heating failure, where the water is not heating up within the expected time. It is usually caused by a faulty heating element, a broken thermistor (temperature sensor), or a control board fault. | High |
| E9 | Bosch | Means a heating circuit fault where the water is not heating properly. It is usually caused by a failed heating element, an NTC sensor problem, wiring corrosion, or communication issues between the control modules. | High |
| F2 | Bosch | Means a heating fault where the water is not reaching the required temperature within a set time, or in specific models a drainage problem. It is usually caused by a faulty heating element (heater). | High |
| H19 | Bosch | Means a heating failure, specifically that the water heating time has been exceeded and the machine is not reaching the desired temperature within a set timeframe. It is usually caused by a water inlet fault or a blockage. | High |
E19High
Bosch
Means a heating failure, where the water is not heating up within the expected time. It is usually caused by a faulty heating element, a broken thermistor (temperature sensor), or a control board fault.
E9High
Bosch
Means a heating circuit fault where the water is not heating properly. It is usually caused by a failed heating element, an NTC sensor problem, wiring corrosion, or communication issues between the control modules.
F2High
Bosch
Means a heating fault where the water is not reaching the required temperature within a set time, or in specific models a drainage problem. It is usually caused by a faulty heating element (heater).
H19High
Bosch
Means a heating failure, specifically that the water heating time has been exceeded and the machine is not reaching the desired temperature within a set timeframe. It is usually caused by a water inlet fault or a blockage.
Don’t see your code? Different model years sometimes use different codes. Get in touch with our parts team and we’ll help you identify the right replacement.
05
Fitting Guidance
MediumGeneral fitting guidance. The exact steps can vary slightly with the make and model of your washing machine.
Safety: Switch off and unplug at the mains and let it cool before you start.
You’ll needScrewdriverNut driver or socket
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
06
Specifications
- Part Number
- 12024715
- Alternative Part Numbers
- 00488731, 00650191, 12040173
- Genuine Spare Part
- Yes
07
Customer Reviews (1)
5.01 review
5
1
4
0
3
0
2
0
1
0
Really Good Product
Easy to access website which allowed me to source the product I needed. Competitive price and very prompt delivery service. Would use this company again.
Ian Sinclair · Aston on Trent ·
Quality
Value
Ease of Fitting