Bosch
Bosch Washing Machine Foot Adjustable Screw In Leg00637399
Suitable for Bosch, Agni, Balay, Coldex, Constructa
Stock Code: 845770
£4.35inc. VAT
£3.63 ex. VAT
Usually dispatched in 5 working days
Easy DIY repair
Most customers complete this swap with basic tools in a few minutes.
01
Compatibility Check
02
Common reasons to replace this part
Won't levelCommonThe foot has seized or stripped so it no longer winds up or down to level the machine.
Shakes and vibratesCommonThe machine rocks or walks across the floor because a foot will no longer sit level.
Banging on spinA foot that has dropped or come loose lets the machine bang against the floor on spin.
03
Error codes related to this part
Error codes are model dependent, so the same brand may have more than one listed.
| Code | Brand | What it means | Confidence |
|---|---|---|---|
| E32 | Bosch | Means an unbalanced load during the spin cycle, preventing the machine from spinning properly to protect itself. It is usually caused by a single heavy item, too few clothes, or a blocked drain filter. | High |
| E32 | Siemens | Means the machine has detected an unbalanced load and interrupted the spin cycle to prevent damage. It is usually caused by small loads, single heavy items such as blankets, or the machine standing unlevel. | High |
| E3 | Whirlpool | Means an unbalanced load during the spin cycle from the washer being too tightly packed or clothing not distributed evenly, while the F2 E3 form means the control board has detected an aberration in a sensor circuit. It is usually caused by an unbalanced load, or in the F2 E3 form a control board or sensor fault. | High |
E32High
Bosch
Means an unbalanced load during the spin cycle, preventing the machine from spinning properly to protect itself. It is usually caused by a single heavy item, too few clothes, or a blocked drain filter.
E32High
Siemens
Means the machine has detected an unbalanced load and interrupted the spin cycle to prevent damage. It is usually caused by small loads, single heavy items such as blankets, or the machine standing unlevel.
E3High
Whirlpool
Means an unbalanced load during the spin cycle from the washer being too tightly packed or clothing not distributed evenly, while the F2 E3 form means the control board has detected an aberration in a sensor circuit. It is usually caused by an unbalanced load, or in the F2 E3 form a control board or sensor fault.
Don’t see your code? Different model years sometimes use different codes. Get in touch with our parts team and we’ll help you identify the right replacement.
04
Fitting Guidance
EasyGeneral fitting guidance. The exact steps can vary slightly with the make and model of your washing machine.
You’ll needSpanner
- 1
- 2
- 3
- 4
- 5
05
Specifications
- Part Number
- 00637399
- Alternative Part Numbers
- 00058781, 00067332, 00604184, 00621463
- Genuine Spare Part
- Yes
06
More Details
This is a genuine adjustable washing machine screw-in foot/leg made of metal.
When your washing machine stands on an uneven floor,screw-in legs help adjust it. Makes sure the washing machine sits flat and stable in your laundry area during wash cycles so there's less vibrations and displacement.
It has a threaded design like a screw, so you can twist it clockwise or counterclockwise to adjust the height.
This adjustable screw-in leg is from Bosch.You can also check in with the other suitable brands from the list above.
Before ordering, please verify with our compatibility checker that this part is suitable for your model.