Bosch
Bosch Washing Machine Dual Inlet Water Valve71080
Suitable for Bosch, Balay, Constructa, Neff, Pitsos
Stock Code: 1014608
£13.20inc. VAT
£11.00 ex. VAT
In Stock
Next Day Delivery Available
Moderate DIY repair
A confident home repairer can do this with basic tools.
01
Compatibility Check
02
What this part does
Controls the water flowing into the machine.
03
Will this fix my appliance?
Tick the symptoms your appliance is showing. We’ll tell you how confident we are this part is the fix.
04
Error codes related to this part
Error codes are model dependent, so the same brand may have more than one listed.
| Code | Brand | What it means | Confidence |
|---|---|---|---|
| E17 | Bosch | Means a water supply timeout, where the machine is not filling with water or is filling too slowly. It is usually caused by a closed tap, a kinked hose, or a clogged inlet filter. | High |
| E23 | Bosch | Means the AquaStop system has been activated by an internal water leak or a severe drainage failure, with water collected in the base plate triggering a safety sensor. It is usually caused by an internal leak or a blockage in the drain pump. | Medium |
| F1 | Bosch | Means a water intake timeout, where the machine is not filling with water or taking too long to fill. It is usually caused by a faulty inlet valve, clogged filters, or a kinked hose. | High |
| E1 | Siemens | Means the machine is not filling with water, is filling too slowly, or has detected a water pressure problem. It is usually caused by a closed tap, a kinked hose, or a clogged inlet filter. | High |
| E10 | Siemens | Means the machine is not filling with water properly. It is usually caused by a fault in the water inlet system, the inlet valve not closing, or the pump not operating, and on some models with automatic dosing it refers to an i-DOS system error. | High |
| E11 | Siemens | Means the machine has failed to fill with water within the allocated time. It is usually caused by blocked inlet filters, kinked hoses, low water pressure, or faulty water valves. | High |
| E17 | Siemens | Means the machine is not receiving enough water or filling fast enough within the time allowed. It is usually caused by low water pressure, a kinked inlet hose, or clogged inlet filters. | High |
| E23 | Siemens | Means the AquaStop system has activated because water has leaked onto the base plate. It is usually caused by a leaking connection, a damaged hose, a jammed filter, or a pump that is not operating. | Medium |
| E29 | Siemens | Means the machine is not receiving enough water or has detected a fault in the door safety mechanism. It is usually caused by a blocked inlet filter, low water pressure, a kinked hose, or an AquaStop safety device trigger. | High |
| E35 | Siemens | Means water has leaked into the base of the machine and activated a flood safety switch, locking the door and stopping the machine. It is usually caused by a pressure switch fault or an overfill issue. | Medium |
| E5 | Siemens | Means the door opening or locking mechanism has failed, or on some models there is a water supply problem. It is usually caused by a faulty door latch or a water inlet fault. | Medium |
| F29 | Siemens | Means the sensor detects no water entering the machine. It is usually caused by a closed water tap, blocked filters, a kinked hose, or an inlet valve not closing. | High |
E17High
Bosch
Means a water supply timeout, where the machine is not filling with water or is filling too slowly. It is usually caused by a closed tap, a kinked hose, or a clogged inlet filter.
E23Medium
Bosch
Means the AquaStop system has been activated by an internal water leak or a severe drainage failure, with water collected in the base plate triggering a safety sensor. It is usually caused by an internal leak or a blockage in the drain pump.
F1High
Bosch
Means a water intake timeout, where the machine is not filling with water or taking too long to fill. It is usually caused by a faulty inlet valve, clogged filters, or a kinked hose.
E1High
Siemens
Means the machine is not filling with water, is filling too slowly, or has detected a water pressure problem. It is usually caused by a closed tap, a kinked hose, or a clogged inlet filter.
E10High
Siemens
Means the machine is not filling with water properly. It is usually caused by a fault in the water inlet system, the inlet valve not closing, or the pump not operating, and on some models with automatic dosing it refers to an i-DOS system error.
E11High
Siemens
Means the machine has failed to fill with water within the allocated time. It is usually caused by blocked inlet filters, kinked hoses, low water pressure, or faulty water valves.
E17High
Siemens
Means the machine is not receiving enough water or filling fast enough within the time allowed. It is usually caused by low water pressure, a kinked inlet hose, or clogged inlet filters.
E23Medium
Siemens
Means the AquaStop system has activated because water has leaked onto the base plate. It is usually caused by a leaking connection, a damaged hose, a jammed filter, or a pump that is not operating.
E29High
Siemens
Means the machine is not receiving enough water or has detected a fault in the door safety mechanism. It is usually caused by a blocked inlet filter, low water pressure, a kinked hose, or an AquaStop safety device trigger.
E35Medium
Siemens
Means water has leaked into the base of the machine and activated a flood safety switch, locking the door and stopping the machine. It is usually caused by a pressure switch fault or an overfill issue.
E5Medium
Siemens
Means the door opening or locking mechanism has failed, or on some models there is a water supply problem. It is usually caused by a faulty door latch or a water inlet fault.
F29High
Siemens
Means the sensor detects no water entering the machine. It is usually caused by a closed water tap, blocked filters, a kinked hose, or an inlet valve not closing.
Don’t see your code? Different model years sometimes use different codes. Get in touch with our parts team and we’ll help you identify the right replacement.
05
Fitting Guidance
MediumGeneral fitting guidance. The exact steps can vary slightly with the make and model of your washing machine.
Safety: Switch off at the mains and turn off the water supply before you start.
You’ll needScrewdriverPliersTowel
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
06
Specifications
- Part Number
- 71080
- Alternative Part Numbers
- 00606001, 00617612
- Genuine Spare Part
- No
07
More Details
This is a high-quality dual inlet water valve for your washing machine.
Controls the flow of hot and cold water into the machine, opening and closing to regulate the water supply based on the selected wash cycle. It ensures the machine fills with the correct amount of water.
If you notice leaking water around the valve, no water flow, or intermittent filling, the solenoid valve might be damaged. Change it with this replacement part.
This dual inlet water valve fits Bosch, Balay, Constructa, Neff, Pitsos, Profilo, and Siemens washing machines.
You can use our compatibility checker to check if it fits your model before ordering.