Next Day Delivery
Order by 4pm
Genuine Parts
Quality guaranteed
UK & Ireland
Fast shipping
Expert Help
Parts advice available
Bosch
Suitable for Bosch, Balay, Constructa, Crolls, Hitachi
Stock Code: 70348
£58.25 ex. VAT
Pumps the waste water out and traps debris before it reaches the pump.
Tick the symptoms your appliance is showing. We’ll tell you how confident we are this part is the fix.
General fitting guidance. The exact steps can vary slightly with the make and model of your washing machine.
Safety: Switch off and unplug at the mains before you start.
This is a genuine drain pump and filter for your wash cycle’s draining phase.
The drain pump and filter expels the water out of the machine through the drainage hose. All the lint, debris, and foreign objects from the laundry water goes through this filter and it keeps them from clogging or damaging the drain pump.
A clean filter means the washing machine works well without drainage problems.
Check out our video below on how to fit a drain pump and filter.
This drain pump and filter is from Bosch. You can also check with the other suitable brands from the list above.
Before ordering, please verify that this set fits your model using our compatibility checker.
To view this video in higher resolution - How to replace & fit a washing machine drain pump
I have used Ransom a few times for domestic appliance parts. The Bosch washing machine pump was German made and very good quality, easy to fit (if you know how to disassemble the machine, take front off). Now washing machine is something and super quiet. Highly recommend this pump and Ransom spares.
Easy to fit and an exact replacement, fitted perfectly.
Excellent service, speedy delivery, was able to repair easily in just over twenty four hours of ordering the part from Ransom Spares on next day delivery. My 10 year old Bosch washing machine now back in action, and much quieter than it has been for a long time!
Replaced a noisy pump. Quality item, easy swap, worth paying extra for the complete components rather than the pump alone.
The pump is located behind the lower plastic trim on the right hand side. I found it best to tip the machine backwards so the front is off the floor. One screw holds the plastic panel in place, which then slides to the right to remove, and one screw holding the pump to the machine. Two spring clips to compress and remove the hose and the electrical connection pulls off with a wiggle. Replacement is the reverse. Great job!
is this drain pump fitted with the motor - or do i need to purchase it separately
Hi Shane, I can confirm this includes the motor for the drain pump.
What are the warranty terms and conditions please?
Hi Stephanie, we offer a one year warranty on this pump.
Hi, Will this fit Siemens WK14D320GB/03 washing machine? The genuine product id is 00145347 and can be found in the below link. https://www.siemens-home.bsh-group.com/uk/shop-productlist/00145347 Please advise. Thanks.
Hi, the drain pump required for your model is RS520401.