Next Day Delivery
Order by 4pm
Genuine Parts
Quality guaranteed
UK & Ireland
Fast shipping
Expert Help
Parts advice available
Bosch
Suitable for Bosch, Balay, Constructa, Hitachi, Lynx
Stock Code: 61750
£14.83 ex. VAT
as per original hose -TWO o rings on washing machine end of hose. with power off-remove lid of machine , set asside 240v transformer 2x Torx screws - removed drain vent bottle using pliers on hose clip -this is the clear /opaque bottle the corrugated waste pipe slots into ,-removed old hose , Cleaned and fitted new hose -(push fit) & re assembled machine . note the Bosch design is poor as the corrugated waste pipe comes directly out of the machine , it would have been far better to have had an 90 degree elbow either built into the hose or air vent bottle- If you push the washing machine bach into kitchen be very carefull not to crimp the hose or overly bend or strain the waste pipe - this is where the old hose leaked ---- weak design by bosch . Ransom Spres once again providing the correct hose for the machine - I d stay clear of the "copies " pertaining to fit the Bosch Machine- with inferior plastics , incorrect O ring configuration - your "asking" for a flood ! So thank You Ransom - Its worth the few quid extra for the original part
What is the length of this hose? ALSO Are the end connectors exactly as shown in the above picture?
Hi Chris. This Hose is 1.5m in length.