Bosch
Bosch Washing Machine Door Seal921238
Suitable for Bosch, Balay, Constructa, Koenic, Pitsos
Stock Code: 921238
£15.40inc. VAT
£12.83 ex. VAT
In Stock
Next Day Delivery Available
Moderate DIY repair
A confident home repairer can do this with basic tools.
01
Compatibility Check
02
What this part does
Creates a watertight seal between the drum and the door.
03
Will this fix my appliance?
Tick the symptoms your appliance is showing. We’ll tell you how confident we are this part is the fix.
04
Error codes related to this part
Error codes are model dependent, so the same brand may have more than one listed.
| Code | Brand | What it means | Confidence |
|---|---|---|---|
| E23 | Bosch | Means the AquaStop system has been activated by an internal water leak or a severe drainage failure, with water collected in the base plate triggering a safety sensor. It is usually caused by an internal leak or a blockage in the drain pump. | Medium |
| E23 | Siemens | Means the AquaStop system has activated because water has leaked onto the base plate. It is usually caused by a leaking connection, a damaged hose, a jammed filter, or a pump that is not operating. | High |
| E35 | Siemens | Means water has leaked into the base of the machine and activated a flood safety switch, locking the door and stopping the machine. It is usually caused by a pressure switch fault or an overfill issue. | High |
E23Medium
Bosch
Means the AquaStop system has been activated by an internal water leak or a severe drainage failure, with water collected in the base plate triggering a safety sensor. It is usually caused by an internal leak or a blockage in the drain pump.
E23High
Siemens
Means the AquaStop system has activated because water has leaked onto the base plate. It is usually caused by a leaking connection, a damaged hose, a jammed filter, or a pump that is not operating.
E35High
Siemens
Means water has leaked into the base of the machine and activated a flood safety switch, locking the door and stopping the machine. It is usually caused by a pressure switch fault or an overfill issue.
Don’t see your code? Different model years sometimes use different codes. Get in touch with our parts team and we’ll help you identify the right replacement.
05
Fitting Guidance
MediumGeneral fitting guidance. The exact steps can vary slightly with the make and model of your washing machine.
Safety: Switch off and unplug at the mains before you start.
You’ll needFlat screwdriver
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
06
Specifications
- Part Number
- 921238
- Alternative Part Numbers
- 318
- Genuine Spare Part
- No
07
More Details
This is a high-quality door seal for your washer door.
Keeps water, soap, and suds right where they belong—inside your washing machine. It creates a snug barrier between the drum and the outer casing, while also softening the door’s close to avoid loud bangs or metal clunks.
If you’ve spotted leaks, rust around the door, or more noise than usual during a spin, your seal could be wearing out. Swap it with this replacement part.
This washing machine door seal fits Bosch, Balay, Constructa, Koenic, Pitsos, Profilo, Siemens, and Viva washing machines.
Before ordering, please verify that this part fits your model using our compatibility checker.
08
Customer Reviews (2)
5.02 reviews
5
2
4
0
3
0
2
0
1
0
Great product
It was very easy to order with RansomSpares and delivery was exactly as promised. Fitting was a small challenge, albeit not due to RansomSpares, and I had to revert to You Tube.
Stephen · Stafford ·
Quality
Value
Ease of Fitting
Good Value
Suited the customers requirements , delivered quickly , good value
Rob Fletch · Gloucester ·
Quality
Value
Ease of Fitting