Bosch
Bosch Washing Machine Door Seal20006036
Suitable for Bosch, Balay, Constructa, Cylinda, Koenic
Stock Code: 71037
·
£40.95inc. VAT
£34.13 ex. VAT
In Stock
Next Day Delivery Available
Moderate DIY repair
A confident home repairer can do this with basic tools.
01
Compatibility Check
02
What this part does
Creates a watertight seal between the drum and the door.
03
Will this fix my appliance?
Tick the symptoms your appliance is showing. We’ll tell you how confident we are this part is the fix.
04
Error codes related to this part
Error codes are model dependent, so the same brand may have more than one listed.
| Code | Brand | What it means | Confidence |
|---|---|---|---|
| E23 | Bosch | Means the AquaStop system has been activated by an internal water leak or a severe drainage failure, with water collected in the base plate triggering a safety sensor. It is usually caused by an internal leak or a blockage in the drain pump. | Medium |
| E23 | Siemens | Means the AquaStop system has activated because water has leaked onto the base plate. It is usually caused by a leaking connection, a damaged hose, a jammed filter, or a pump that is not operating. | High |
| E35 | Siemens | Means water has leaked into the base of the machine and activated a flood safety switch, locking the door and stopping the machine. It is usually caused by a pressure switch fault or an overfill issue. | High |
| E12 | Smeg | Means water leakage has activated the safety flood switch, or the water is not draining properly. It is usually caused by a leak, a draining fault, a pump not operating, a door not sealing, or a malfunctioning pressure switch. | High |
E23Medium
Bosch
Means the AquaStop system has been activated by an internal water leak or a severe drainage failure, with water collected in the base plate triggering a safety sensor. It is usually caused by an internal leak or a blockage in the drain pump.
E23High
Siemens
Means the AquaStop system has activated because water has leaked onto the base plate. It is usually caused by a leaking connection, a damaged hose, a jammed filter, or a pump that is not operating.
E35High
Siemens
Means water has leaked into the base of the machine and activated a flood safety switch, locking the door and stopping the machine. It is usually caused by a pressure switch fault or an overfill issue.
E12High
Smeg
Means water leakage has activated the safety flood switch, or the water is not draining properly. It is usually caused by a leak, a draining fault, a pump not operating, a door not sealing, or a malfunctioning pressure switch.
Don’t see your code? Different model years sometimes use different codes. Get in touch with our parts team and we’ll help you identify the right replacement.
05
Fitting Guidance
MediumGeneral fitting guidance. The exact steps can vary slightly with the make and model of your washing machine.
Safety: Switch off and unplug at the mains before you start.
You’ll needFlat screwdriver
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
06
Specifications
- Part Number
- 20006036
- Alternative Part Numbers
- 00680768, 00772658
- Genuine Spare Part
- Yes
07
More Details
This is a genuine door seal for your washer door.
Keeps water, detergent, and suds safely inside your washing machine, right where they belong. It also softens the door close, cutting down on noise and stopping metal parts from knocking together.
If you’ve spotted leaks, rust marks, or strange noises mid-cycle, your current seal might be worn out. Swap it with this one to get things running smoothly again.
Check our DIY video below on how to fit a new one.
This door seal for your washing machine is from Bosch. It also fits Balay, Constructa, Cylinda, Koenic, Lord, Neff, Pitsos, Profilo, Schulthess, Sharp, Siemens, Smeg, and Viva models.
Before ordering, please verify that this part fits your model using our compatibility checker.
08
Video
How to Replace Your Washing Machine Door Seal
The following DIY repair video should assist you in fitting this part. However the exact procedure may differ depending on your make and model.
Safety Warning - Always unplug from the mains before carrying out any repairs.
09
Customer Reviews (20)
4.720 reviews
5
14
4
6
3
0
2
0
1
0
Sort by:||
Great Product fixed the issue
Had a small leak from our Bosch washing machine due a chunk of the seal being missing. Found & ordered the seal from Ransom Spares. There were a few other places I could’ve got it from & Ransom wasn’t the cheapest but it was the best match in terms of washing machine model number. I didn’t pay for the fast service so took 2 to 3 days to arrive & then had to wait for the weekend to fit it so along time to wait for a non-leaking washer. Seal was well packed & looked the genuine article. I watched a video on YouTube from a “Appliance Fault” which was really good to follow. Takes quite a while but very simple & straightforward. Big tip is to buy a pick hook for the fitting of the last spring retainer, I couldn’t do it without it. Fixed the problem & now works perfectly. Saved me a load of money not having to get a repair man out.
David Doody · Solihull ·
Quality
Value
Ease of Fitting
Washing machine seal
First class on all fronts. Will use again for sure
Neil Mander · Bristol ·
Quality
Value
Ease of Fitting
Replacement door seal. Good quality, a little tricky to fit.
Bought to replace old seal which was very mouldy. Video on website helpful guide. Taking off the seal was not too difficult but required a little common sense in dismantling the front cover and control panel. The real challenge was refitting the two retaining wires. Two people helps and two sets of pliers including some thin nosed pliers. Anyway so far so good. Suggest taking photos while dismantling as a guide.
Tim H · Hampton ·
Quality
Value
Ease of Fitting
Great replacement, make sure you leave plenty of time to fit
Replaced a mouldy door seal with this and it fits perfectly. Doesn’t come with instructions so had to go to YouTube to find out how to do the job. It helps to have someone on hand to help with the heavy lifting (to unscrew bolts at bottom of washing machine when taking front off and refitting) and when trying to get the final clamp on.
Ken · Newton Abbot ·
Quality
Value
Ease of Fitting
Easy to fit
Very easy to install with all of the new parts. Fit our old washing machine seamlessly
Collette · Surrey ·
Quality
Value
Ease of Fitting
10
Questions & Answers (1)
Hi, can you please confirm that this is made by Bosch? Thanks :)
Susan · Cumbria ·
Hi Susan, I can confirm this is a genuine Bosch seal.
JordanStaff·