Bosch
Bosch Washing Machine Door Seal00354135
Suitable for Bosch, Balay, Constructa, Hitachi, Koenic
Stock Code: 61630
£40.10inc. VAT
£33.42 ex. VAT
In Stock
Next Day Delivery Available
Moderate DIY repair
A confident home repairer can do this with basic tools.
01
Compatibility Check
02
What this part does
Creates a watertight seal between the drum and the door.
03
Will this fix my appliance?
Tick the symptoms your appliance is showing. We’ll tell you how confident we are this part is the fix.
04
Error codes related to this part
Error codes are model dependent, so the same brand may have more than one listed.
| Code | Brand | What it means | Confidence |
|---|---|---|---|
| E23 | Bosch | Means the AquaStop system has been activated by an internal water leak or a severe drainage failure, with water collected in the base plate triggering a safety sensor. It is usually caused by an internal leak or a blockage in the drain pump. | Medium |
| E23 | Siemens | Means the AquaStop system has activated because water has leaked onto the base plate. It is usually caused by a leaking connection, a damaged hose, a jammed filter, or a pump that is not operating. | High |
| E35 | Siemens | Means water has leaked into the base of the machine and activated a flood safety switch, locking the door and stopping the machine. It is usually caused by a pressure switch fault or an overfill issue. | High |
E23Medium
Bosch
Means the AquaStop system has been activated by an internal water leak or a severe drainage failure, with water collected in the base plate triggering a safety sensor. It is usually caused by an internal leak or a blockage in the drain pump.
E23High
Siemens
Means the AquaStop system has activated because water has leaked onto the base plate. It is usually caused by a leaking connection, a damaged hose, a jammed filter, or a pump that is not operating.
E35High
Siemens
Means water has leaked into the base of the machine and activated a flood safety switch, locking the door and stopping the machine. It is usually caused by a pressure switch fault or an overfill issue.
Don’t see your code? Different model years sometimes use different codes. Get in touch with our parts team and we’ll help you identify the right replacement.
05
Fitting Guidance
MediumGeneral fitting guidance. The exact steps can vary slightly with the make and model of your washing machine.
Safety: Switch off and unplug at the mains before you start.
You’ll needFlat screwdriver
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
06
Specifications
- Part Number
- 00354135
- Alternative Part Numbers
- 00362254
- Genuine Spare Part
- Yes
07
More Details
Genuine door seal that’s specifically made for your washer door. It’s resistant to water, and detergent and can withstand mechanical stress from everyday use.
Its circular shape has flaps as mounting points so it’s easy to install and remove in the door assembly.
The door seal is a waterproof seal between the door and the washing machine drum so there’s no water and detergent leaking or getting trapped inside the drum.
Check out our DIY video guide below to help you with the replacement process.
This door seal for your washing machine is from Bosch. Also fits Balay, Constructa, Hitachi, Koenic, Lynx, Merker, Novamatic, Pitsos, Profilo, Schulthess, Siemens, and Viva washing machines.
Before ordering, please verify that this fits your model using our compatibility checker.
08
Video
How to replace a Washing Machine Door Seal:
The following DIY repair video should assist you in fitting this part. However the exact procedure may differ depending on your make and model.
Safety Warining - Always unplug from the mains before carrying out any repairs.
09
Customer Reviews (28)
4.928 reviews
5
26
4
2
3
0
2
0
1
0
Sort by:||
Good product.
Went for genuine spares this time ad my previous door seal failed after what I think was a relatively short time. Easy to fit and seals well
Graham Collins · Lincoln ·
Quality
Value
Ease of Fitting
Quality Part - Easy to Fit
After watching some videos showing how the part is fitted and what you need to dismantle to fit it, I tackled the job myself. The part seems to be good quality and true to the original. It was quite easy to fit and I was pleased that I got it right first time and there was no longer a leak! An experienced domestic repair man could probably fit it in 20 mins. It took me about 1.5 hours, but I was able to do it with just a few hand tools and not too much frustration or struggling.
Tim Rombach · Chippenham ·
Quality
Value
Ease of Fitting
Door seal
Exactly what was required Springs made it a bit awkward to fit, but exactly what was required/expected
Wayne Wix · Brentwood ·
Quality
Value
Ease of Fitting
Excellent service
Easy to use website, fast delivery and the repair video was enormously helpful, especially as the one used in the video was almost identical to mine. Job done in about 30 minutes. Will use this company again.
John Wager · Benfleet ·
Quality
Value
Ease of Fitting
Great 👍 Video.
It was extremely ease to replace with help of the video.I would have struggled to replace it with out the video. Thank you very much. Vic. Plehov.
Victor plehov · Melton Mowbray ·
Quality
Value
Ease of Fitting