Next Day Delivery
Order by 4pm
Genuine Parts
Quality guaranteed
UK & Ireland
Fast shipping
Expert Help
Parts advice available
Bosch
Suitable for Bosch, Neff, Siemens
Stock Code: 120505
£9.13 ex. VAT
Creates a watertight seal between the drum and the door.
Tick the symptoms your appliance is showing. We’ll tell you how confident we are this part is the fix.
Error codes are model dependent, so the same brand may have more than one listed.
| Code | Brand | What it means | Confidence |
|---|---|---|---|
| E23 | Bosch | Means the AquaStop system has been activated by an internal water leak or a severe drainage failure, with water collected in the base plate triggering a safety sensor. It is usually caused by an internal leak or a blockage in the drain pump. | Medium |
| E23 | Siemens | Means the AquaStop system has activated because water has leaked onto the base plate. It is usually caused by a leaking connection, a damaged hose, a jammed filter, or a pump that is not operating. | High |
| E35 | Siemens | Means water has leaked into the base of the machine and activated a flood safety switch, locking the door and stopping the machine. It is usually caused by a pressure switch fault or an overfill issue. | High |
Bosch
Means the AquaStop system has been activated by an internal water leak or a severe drainage failure, with water collected in the base plate triggering a safety sensor. It is usually caused by an internal leak or a blockage in the drain pump.
Siemens
Means the AquaStop system has activated because water has leaked onto the base plate. It is usually caused by a leaking connection, a damaged hose, a jammed filter, or a pump that is not operating.
Siemens
Means water has leaked into the base of the machine and activated a flood safety switch, locking the door and stopping the machine. It is usually caused by a pressure switch fault or an overfill issue.
Don’t see your code? Different model years sometimes use different codes. Get in touch with our parts team and we’ll help you identify the right replacement.
General fitting guidance. The exact steps can vary slightly with the make and model of your washing machine.
Safety: Switch off and unplug at the mains before you start.
A door seal is a bendable part that sits between a washing machine's door and drum. When the door is shut, it creates an airtight fit that keeps water from escaping while the washing and spinning cycles are running.
If you observe any evidence of wear, damage, or leakage, replace the door seal on your washing machine. The door seal ages, deteriorates, or develops rips.
Water leaks during the washing process endanger your floors or the vicinity of the machine and lessen its functionality.
Refer to our demo video below on how to replace a washing machine door seal. This part fits Bosch, Neff, and Siemens washing machines.
Use our compatibility checker to see if this part fits your model.
The following DIY repair video should assist you in fitting this part. However the exact procedure may differ depending on your make and model.
Safety Warning - Always unplug from the mains before carrying out any repairs.
Very useful video on the ransomspares website to show how to install. Installation was relatively straightforward, only the refitting of the spring to hold the seal required some extra patience. Overall, a great cost effective part, and our washing machine looks great again.
Fast,cheap and professional, you can't get better service
Very happy woth the product , fits perfectly and very easy to fit it. Price is also great. Ransom spares customer service are top at there job, so helpful.
Great and Quality product, great price, easy to fit
Received this door seal within days and fitted with no problems at all. Very happy with it
Is this compatible with Bosch WAE24369GB/16 thanks
Hi, I can confirm this seal is compatible with your model.
Will this item fit model number WAN28280GB/26
Hi Michael, I can confirm this seal is correct for your model.
HI Will this work with WAE24162GB/03, pease?
Hi Sara, this seal isn't compatible with your model. The seal you need is RS61630.
Hello, my Bosch washing machine is WAQ28460GB/06 so are you able to tell me which rubber door seal I need to buy please?
Hi Matthew, the door seal required for your model is RS514127.
Hi, will this fit a Bosch Maxx Plus E-Nr. WF02860GB/01 Thank you Rob
Hi Robert, I can confirm this seal is compatible with your model.