Bosch
Bosch Washing Machine Door Seal Rubber Gasket00361127
Suitable for Bosch, Balay, Constructa, Koenic, Lord
Stock Code: 59351
·
£42.60inc. VAT
£35.50 ex. VAT
In Stock
Next Day Delivery Available
Moderate DIY repair
A confident home repairer can do this with basic tools.
01
Compatibility Check
02
What this part does
Creates a watertight seal between the drum and the door.
03
Will this fix my appliance?
Tick the symptoms your appliance is showing. We’ll tell you how confident we are this part is the fix.
04
Error codes related to this part
Error codes are model dependent, so the same brand may have more than one listed.
| Code | Brand | What it means | Confidence |
|---|---|---|---|
| E23 | Bosch | Means the AquaStop system has been activated by an internal water leak or a severe drainage failure, with water collected in the base plate triggering a safety sensor. It is usually caused by an internal leak or a blockage in the drain pump. | Medium |
| E23 | Siemens | Means the AquaStop system has activated because water has leaked onto the base plate. It is usually caused by a leaking connection, a damaged hose, a jammed filter, or a pump that is not operating. | High |
| E35 | Siemens | Means water has leaked into the base of the machine and activated a flood safety switch, locking the door and stopping the machine. It is usually caused by a pressure switch fault or an overfill issue. | High |
E23Medium
Bosch
Means the AquaStop system has been activated by an internal water leak or a severe drainage failure, with water collected in the base plate triggering a safety sensor. It is usually caused by an internal leak or a blockage in the drain pump.
E23High
Siemens
Means the AquaStop system has activated because water has leaked onto the base plate. It is usually caused by a leaking connection, a damaged hose, a jammed filter, or a pump that is not operating.
E35High
Siemens
Means water has leaked into the base of the machine and activated a flood safety switch, locking the door and stopping the machine. It is usually caused by a pressure switch fault or an overfill issue.
Don’t see your code? Different model years sometimes use different codes. Get in touch with our parts team and we’ll help you identify the right replacement.
05
Fitting Guidance
MediumGeneral fitting guidance. The exact steps can vary slightly with the make and model of your washing machine.
Safety: Switch off and unplug at the mains before you start.
You’ll needFlat screwdriver
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
06
Specifications
- Part Number
- 00361127
- Alternative Part Numbers
- 11012879
- Genuine Spare Part
- Yes
07
More Details
What is the mechanism of the door seal rubber gasket?
Between the drum and the washing machine's outside shell, the door seal serves as a seal. When the door is closed, it forms a tight seal that stops water from leaking while the washing and spinning cycles are running.
It keeps the machine's efficiency and guards against any water damage by trapping the water inside.
When should I replace the door seal rubber gasket?
Replace the door seal on your washing machine if you notice any signs of wear, damage, or leakage. Over time, the door seal becomes stiffer, wears down, or develops rips.
This causes water leaks throughout the washing process, which may injure your floors or the area around the machine's and reduce its functionality.
How do you replace the door seal on a washing machine?
Watch our DIY video on how to replace a washing machine door seal.
This washing machine door seal is a genuine Bosch washing machine spare part. It also fits Balay, Constructa, Koenic, Lynx, Neff, Pitsos, Profilo, Siemens, and Viva washing machines.
08
Video
How to replace a Washing Machine Door Seal:
The following DIY repair video should assist you in fitting this part. However the exact procedure may differ depending on your make and model.
Safety Warning - Always unplug from the mains before carrying out any repairs.
09
Customer Reviews (31)
4.931 reviews
5
29
4
2
3
0
2
0
1
0
Sort by:||
Perfect replacement spare part for Bosch WAN2821GB/38
Having bought spares from Ransom Spares before, I bought this Washing Machine Door Seal Rubber Gasket to replace the seal on my Bosch WAN2821GB/38. Unfortunately the original got damaged, presumably by something sharp in the washing. The spare arrived within a few days, was well priced and easy to replace. The video resources on the Ransom Spares were excellent and really helpful. As before, would thoroughly recommend Ransom Spares.
Jonathan Williams · Fleet ·
Quality
Value
Ease of Fitting
seemed to do the job but more of a fiddle to fit than the Utube
Just a bit concerned that i found a much cheaper offer on your web site. The utube instructions missed a few steps on the direction of fitting an may be referred to an older model?
Brian Nicholas Bartle · Tadcaster ·
Quality
Value
Ease of Fitting
Perfect fit. Arrived quickly
Perfect fit. Arrived quickly. The Ransom video guide helped a lot
Graham Lilleystone · Shepton Mallet ·
Quality
Value
Ease of Fitting
Easy to find correct part
Model designation search lead straight to this part, so correct part ordered and arrived with no fuss. Easy enough to fit the part itself, however the springs that hold it in are a different matter altogether, but go in with a bit of perseverance. Broken machine now fixed and back in full use
J.mcgrogan · Stockton ·
Quality
Value
Ease of Fitting
Product worked pefectly
Product was exactly as described. Website was helpful in determining which one I needed for my model of washing machine. I won’t lie, it was a challenge to fit this on my own, but the video provided on the site was v helpful.
Jonathan Clarkson · London ·
Quality
Value
Ease of Fitting
10
Questions & Answers (5)
Will the compatible door seal (your part no. RS120505 priced at £14.45) fit the BOSCH WAN24100GB/24 washing machine?
Warren · West Sussex ·
Hi Warren, I can confirm RS120505 is compatible with your washing machine.
JordanStaff·
Is this compatible with Bosch WAT28370GB/13?
Jo · London ·
Hi Jo, the door seal required for your washing machine is RS71037.
JordanStaff·
Is this compatible with a Bosch 296WAN24001GB? It says unable to tell when I typed into the bar. Many thanks.
Harry · Stratford-upon-Avon ·
Hi Harry, I can confirm this door seal is correct for your model.
JordanStaff·
Hi, our washer is Bosch Avantixx 7 Vario perfect, 10 yes old, we think model no E-N R WAE24367GB -34 FD SP 9202 6008318. Which replacement door seal do we need. Thanks alan
Alan · ACCRINGTON ·
Hi Alan, I can confirm this is the correct door seal for your model.
JordanStaff·
hi is this compatible with bosch washing machine WAN28280GB/24 PLEASE ?
AWARA · london ·
Hi Awara, I can confirm this is the correct seal for your washing machine.
JordanStaff·