0333 300 1293

Phone Lines Open Mon - Fri 10 am - 4.30 pm (excluding bank holidays)

BOSCH WASHING MACHINE CARBON BRUSHES

4.8 out of 5 customer rating

Read review(s) | Read customer question(s)

Our Part Number: RS120246

Usually despatched within 3 working days

Category: Washing Machines

Our Price

£9.50

Please correct the errors and try again.
 

Is this part compatible with my appliance?

Choose your brand from the list below to check your model compatibility.

Details / Specifications

Fits Bosch, Neff, Siemens Washing Machines

Latest Product Review(s)

5 Customer Review(s)

Good items, a tiny bit too long...

By Jonathan Bromley - Oxford - 19th Jun 2020

Bought these brushes to repair the motor in a Bosch WFP3300 washing machine. The old brushes were VERY badly worn! As pointed out in various forums, the original brushes' braid connectors are pressure welded into place, but it's pretty easy to re-connect the new ones by soldering to the old braid. Disassembling the motor to get at the brushes looks a little scary at first, but in fact is very straightforward. Good quality brushes, a nice fit in the housing, but they were about 3mm too long so the pressure spring didn't properly seat on the back end of the brush. I had to cut a little step out of the back end of each to allow the spring to seat correctly. It was very easy to do, as the carbon material is so soft. Delivery was painfully slow, but that was Royal Mail's fault during the COVID disruption; RansomSpares kept their side of the bargain and were helpful when I queried the delay in online chat. Best of all, I have a working washing machine now....

Overall

Quality

Value

Ease of Fitting

Only supplier to get these right

By Andy - Surrey - 24th Mar 2015

Bought some other brushes that claimed to fit my Bosch WFT2806gb/13 washer but they were the wrong type. These from Ransom were the correct brushes - they have the copper connecting wire coming out of a notch in the corner and that is crucial for the motor fitting. Just about every other supplier had brushes with the wire and spring down the centre - which will not fit correctly. The motor head on this washer has the brush springs built into the head of the motor and so these brushes are quite specific. Bosch want to sell the whole motor head unit for £70 but these brushes just need to be soldered in. If you have a soldering iron then it's very easy to do. Well done for taking the time to actually list the right brushes as most sites I found were wrong.

Overall

Quality

Value

Ease of Fitting

Great Product

By Mr Daniel Faoro - London - 31st Jan 2014

Great product and delivery, highly recommended, was not that easy to replaced due to the fact that my washing machine was an oldish model, but all went well and my washing machine is fully operative again, thank's for your demo video which was helpful. I have saved quite a bit by doing the job myself and learned to deal with that specific problem.

Overall

Quality

Value

Ease of Fitting

Motor brushes

By Mr Manoj Sickotra - Leicester - 22nd Jun 2013

The brushes fits housing perfectly, but the copper braid need to be soldered to the original braid. The original braid is factory pressure welded.

Overall

Quality

Value

Ease of Fitting

Carbon Brushes

By Mr James Mitchell - Saint Albans Hertfordshire - 8th Jun 2012

These carbon brushes replaced my worn-out ones. Fairly easy to fit, just a bit of a messy task if you don't like getting your hands dirty! Good value for money, as I did my own research to diagnose problem. Would have spent a lot more calling an engineer to first find out what was wrong, and then to fit it. Still working well after 3 months of use.

Overall

Quality

Value

Ease of Fitting

Questions And Answers

Be the first to ask a question for this product.

Ask a new question