Beko
Beko Washing Machine Water Inlet ValveC00869647
Suitable for Beko, Altus, Arcelik, Arctic, Belling
Stock Code: 833666
£32.60inc. VAT
£27.17 ex. VAT
In Stock
Next Day Delivery Available
Moderate DIY repair
A confident home repairer can do this with basic tools.
01
Compatibility Check
02
What this part does
Controls the water flowing into the machine.
03
Will this fix my appliance?
Tick the symptoms your appliance is showing. We’ll tell you how confident we are this part is the fix.
04
Error codes related to this part
Error codes are model dependent, so the same brand may have more than one listed.
| Code | Brand | What it means | Confidence |
|---|---|---|---|
| E29 | Beko | Means a water inlet failure, where the machine detects little or no water entering the drum. It is usually caused by a closed tap, a kinked hose, blocked inlet filters, low water pressure, or a power supply issue. | High |
| E4 | Beko | Means a water fill failure, where the machine is not receiving or detecting water fast enough. It is usually caused by a restricted water supply, a kinked hose, a clogged filter, or a faulty water inlet valve. | High |
| E8 | Beko | Means a failure to fill with water, which can make the machine stop mid cycle or refuse to start. It is usually caused by a faulty water inlet valve, a clogged inlet filter, or a faulty pressure switch. | High |
| E1 | Blomberg | Means the machine is not filling with water properly, or has detected a fill timeout. It is usually caused by a closed water tap, a kinked hose, a blocked inlet filter, or a faulty inlet valve. | High |
| E4 | Blomberg | Means the machine is failing to fill with water, filling too slowly, or has a water level sensor fault. It is usually caused by a closed tap, a kinked hose, a clogged inlet filter, or a faulty inlet valve. | High |
| E1 | Grundig | Means the machine is not filling with water or not detecting water within the expected time. It is usually caused by a water inlet fault, a jammed filter, a door that is not locking, or a pump not operating on some top-load models with a drainage timeout. | High |
| E11 | Grundig | Means the machine cannot detect water entering or reaching the required level within a set time. It is usually caused by a restricted water supply, a blocked inlet valve, a faulty pressure sensor, or a motor error. | High |
| E12 | Grundig | Means a drainage problem, or a flood switch error where water has leaked into the base and the flood switch has activated. It is usually caused by kinks or blockages in the drain hose. | Medium |
| E17 | Grundig | Means the machine is failing to fill with water or is taking too long to fill. It is usually caused by low water pressure, a clogged inlet filter, or a faulty inlet valve, and can relate to a drain issue or excessive suds. | High |
| E4 | Grundig | Means a water inflow timeout where the machine is not filling or is filling too slowly within the allotted time. It is usually caused by a water protection system error, a drainage issue, a sensor fault, or an unbalanced load. | High |
| E8 | Grundig | Means the machine is not filling with water or is filling too slowly. It is usually caused by closed water taps, a kinked inlet hose, a blocked inlet filter, or a faulty water inlet valve. | High |
E29High
Beko
Means a water inlet failure, where the machine detects little or no water entering the drum. It is usually caused by a closed tap, a kinked hose, blocked inlet filters, low water pressure, or a power supply issue.
E4High
Beko
Means a water fill failure, where the machine is not receiving or detecting water fast enough. It is usually caused by a restricted water supply, a kinked hose, a clogged filter, or a faulty water inlet valve.
E8High
Beko
Means a failure to fill with water, which can make the machine stop mid cycle or refuse to start. It is usually caused by a faulty water inlet valve, a clogged inlet filter, or a faulty pressure switch.
E1High
Blomberg
Means the machine is not filling with water properly, or has detected a fill timeout. It is usually caused by a closed water tap, a kinked hose, a blocked inlet filter, or a faulty inlet valve.
E4High
Blomberg
Means the machine is failing to fill with water, filling too slowly, or has a water level sensor fault. It is usually caused by a closed tap, a kinked hose, a clogged inlet filter, or a faulty inlet valve.
E1High
Grundig
Means the machine is not filling with water or not detecting water within the expected time. It is usually caused by a water inlet fault, a jammed filter, a door that is not locking, or a pump not operating on some top-load models with a drainage timeout.
E11High
Grundig
Means the machine cannot detect water entering or reaching the required level within a set time. It is usually caused by a restricted water supply, a blocked inlet valve, a faulty pressure sensor, or a motor error.
E12Medium
Grundig
Means a drainage problem, or a flood switch error where water has leaked into the base and the flood switch has activated. It is usually caused by kinks or blockages in the drain hose.
E17High
Grundig
Means the machine is failing to fill with water or is taking too long to fill. It is usually caused by low water pressure, a clogged inlet filter, or a faulty inlet valve, and can relate to a drain issue or excessive suds.
E4High
Grundig
Means a water inflow timeout where the machine is not filling or is filling too slowly within the allotted time. It is usually caused by a water protection system error, a drainage issue, a sensor fault, or an unbalanced load.
E8High
Grundig
Means the machine is not filling with water or is filling too slowly. It is usually caused by closed water taps, a kinked inlet hose, a blocked inlet filter, or a faulty water inlet valve.
Don’t see your code? Different model years sometimes use different codes. Get in touch with our parts team and we’ll help you identify the right replacement.
05
Fitting Guidance
MediumGeneral fitting guidance. The exact steps can vary slightly with the make and model of your washing machine.
Safety: Switch off at the mains and turn off the water supply before you start.
You’ll needScrewdriverPliersTowel
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
06
Specifications
- Part Number
- C00869647
- Alternative Part Numbers
- 2836480100, 2906850200, C00864966, C00864970
- Genuine Spare Part
- Yes