Beko
Beko Washing Machine Shock AbsorberC00912657
Suitable for Beko, Arcelik, Arctic, Belling, Blomberg
Stock Code: 149758
·
£8.90inc. VAT
£7.42 ex. VAT
In Stock
Next Day Delivery Available
Moderate DIY repair
A confident home repairer can do this with basic tools.
01
Compatibility Check
02
What this part does
Steadies the drum and reduces vibration during the spin.
03
Will this fix my appliance?
Tick the symptoms your appliance is showing. We’ll tell you how confident we are this part is the fix.
04
Error codes related to this part
Error codes are model dependent, so the same brand may have more than one listed.
| Code | Brand | What it means | Confidence |
|---|---|---|---|
| C9 | Beko | Means a drum imbalance or a failure to detect the laundry load during the spin cycle, so the machine cannot safely spin. It is usually caused by uneven clothes distribution, overloading, or a faulty motor triac. | High |
| F9 | Beko | Means an unbalanced load in the drum that prevents the spin cycle starting. It is usually caused by uneven laundry or an overloaded machine. | Medium |
C9High
Beko
Means a drum imbalance or a failure to detect the laundry load during the spin cycle, so the machine cannot safely spin. It is usually caused by uneven clothes distribution, overloading, or a faulty motor triac.
F9Medium
Beko
Means an unbalanced load in the drum that prevents the spin cycle starting. It is usually caused by uneven laundry or an overloaded machine.
Don’t see your code? Different model years sometimes use different codes. Get in touch with our parts team and we’ll help you identify the right replacement.
05
Fitting Guidance
MediumGeneral fitting guidance. The exact steps can vary slightly with the make and model of your washing machine.
Safety: Switch off and unplug at the mains before you start.
You’ll needScrewdriverPliersSocket set
- 1
- 2
- 3
- 4
- 5
- 6
- 7
06
Specifications
- Part Number
- C00912657
- Alternative Part Numbers
- 2816871100
- Genuine Spare Part
- Yes
07
More Details
Genuine rubber and metal drum shock absorber for your washing machine. The rubber part is for vibrations and impacts. The metal part gives structural support while the machine is in use.
When the washing machine drum spins, the shock absorber keeps it from shaking too much. Prevents the drum from shifting or rolling while in use.
Also extends the machine's lifespan and lowers mechanical failures. It’s an energy absorber and a shield for internal components from wear and tear.
This drum shock absorber is from Beko. You can also check other suitable brands from the list above.
Before ordering, please verify that this fits your model using our compatibility checker.
08
Customer Reviews (3)
4.73 reviews
5
2
4
1
3
0
2
0
1
0
good quality
very reasonable price and good quality part. fitting was straight forward
Paul Jacob · BRISTOL ·
Quality
Value
Ease of Fitting
Great product, arrived on time
Ordered two to cure a knocking noise from our washing machine. Arrived on time and well packaged. Was fiddely to replace the old ones as the plastic locking pins take a fair bit of force to put in place. Seems to have resolved the issue *touch wood*
Glenn Marshall · Basildon ·
Quality
Value
Ease of Fitting
Cured shakes on high spin.
Cured problem of washing machine bashing around on higher spins. Especially with towels. Fairly easy to fit. Laid machine on its side to access in through the base. Hardest part is knocking out the plastic pins. Limited room to be able to hit with hammer. Helps if given a spray of silicone lubricant. Note it is the centre of the pin that slides out first releasing the outside part to be pulled out. Holes in dampers appear small but expand when pins driven through them. Would recommend doing it. Solved problem and lot cheaper than engineer.
David Powell · High Wycombe ·
Quality
Value
Ease of Fitting
09
Questions & Answers (1)
Does this part come with attachment fittings
Peter · Bedford ·
Hi Peter, this is the suspension arm only.
JordanStaff·