Beko
Beko Washing Machine Heating ElementC00865326
Suitable for Beko, Belling, Blomberg, Cylinda, Fisher and Paykel
Stock Code: 833233
£24.85inc. VAT
£20.71 ex. VAT
In Stock
Next Day Delivery Available
Moderate DIY repair
A confident home repairer can do this with basic tools.
01
Compatibility Check
02
What this part does
Heats the wash water to the selected programme temperature.
03
Will this fix my appliance?
Tick the symptoms your appliance is showing. We’ll tell you how confident we are this part is the fix.
04
Error codes related to this part
Error codes are model dependent, so the same brand may have more than one listed.
| Code | Brand | What it means | Confidence |
|---|---|---|---|
| E11 | Beko | Means a heating element failure or an NTC temperature sensor fault, so the water is not getting hot. It is usually caused by a faulty heating element or temperature sensor. | High |
| E19 | Beko | Means a heating failure where the machine cannot heat the water during a wash cycle, or on some models a general drainage issue or fan malfunction. It is usually caused by a failure to heat, or by a drainage fault or fan that stops the cycle completing. | High |
| E2 | Beko | Means a failure to heat the water during a wash cycle. It is usually caused by a faulty heating element or an NTC temperature sensor issue. | High |
| E60 | Beko | Means a heating failure, where the machine cannot heat the water to the required temperature. It is usually caused by a faulty heating element or a malfunctioning temperature sensor (thermostat). | High |
| H1 | Beko | Means a fault with the heating system, where the machine fails to heat the water or the heater operates when it should not. It is usually caused by a heating fault or a control board issue. | High |
| H2 | Beko | Means a heating circuit fault, where the control board cannot detect the heating element or the water is not heating, so the machine stops the cycle. It is usually caused by a faulty heating element or control board. | High |
E11High
Beko
Means a heating element failure or an NTC temperature sensor fault, so the water is not getting hot. It is usually caused by a faulty heating element or temperature sensor.
E19High
Beko
Means a heating failure where the machine cannot heat the water during a wash cycle, or on some models a general drainage issue or fan malfunction. It is usually caused by a failure to heat, or by a drainage fault or fan that stops the cycle completing.
E2High
Beko
Means a failure to heat the water during a wash cycle. It is usually caused by a faulty heating element or an NTC temperature sensor issue.
E60High
Beko
Means a heating failure, where the machine cannot heat the water to the required temperature. It is usually caused by a faulty heating element or a malfunctioning temperature sensor (thermostat).
H1High
Beko
Means a fault with the heating system, where the machine fails to heat the water or the heater operates when it should not. It is usually caused by a heating fault or a control board issue.
H2High
Beko
Means a heating circuit fault, where the control board cannot detect the heating element or the water is not heating, so the machine stops the cycle. It is usually caused by a faulty heating element or control board.
Don’t see your code? Different model years sometimes use different codes. Get in touch with our parts team and we’ll help you identify the right replacement.
05
Fitting Guidance
MediumGeneral fitting guidance. The exact steps can vary slightly with the make and model of your washing machine.
Safety: Switch off and unplug at the mains and let it cool before you start.
You’ll needScrewdriverNut driver or socket
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
06
Specifications
- Part Number
- C00865326
- Alternative Part Numbers
- 2850360100
- Genuine Spare Part
- Yes
07
More Details
Genuine heating element for your washing machine.
Heats the water during the wash cycle—just the right amount to lift dirt and leave your clothes feeling fresh and clean. It also works with your washing machine’s control system to adjust the temperature for different programs.
If it’s worn or damaged, you might notice the water staying cold, longer wash times, error codes, or your machine stopping mid-cycle. Swap it out with this reliable replacement to get everything running smoothly again.
This washing machine heating element is from Beko. Also fits Belling, Blomberg, Cylinda, Fisher and Paykel, Flavel, Lamona, Montpellier, New World, and Zenith models.
Before ordering, please verify that this part is suitable for your model using our compatibility checker.
08
Customer Reviews (1)
5.01 review
5
1
4
0
3
0
2
0
1
0
Easy to fit
Arrived quickly and was easy to fit. Washing machine working perfectly now.
David Swinton · Leatherhead ·
Quality
Value
Ease of Fitting